Marmitek GIGAVIDEO80 Setting UP the Transmitter, Setting UP the Receiver, See figures 1

Page 4

1 RCA cable (white / red / yellow).

2 Scart adapters (labelled Transmitter).

1 Scart adapter (labelled Receiver).

1 Scart adapter (labelled AV OUT).

1 User manual.

3. SETTING UP THE TRANSMITTER.

See figures 1 and 3.

The transmitter can be connected to two A/V devices and a local TV.

1.Switch the Power slide switch [B] into the 'OFF' position.

2.Connect the Mini-DIN/RCA cable to ‘ AV IN 1’ or ‘AV IN 2’ [C] of the transmitter.

3.Connect the RCA plugs of this cable to the A/V device you want to transmit the signal from. Make sure the colours of the plugs and the input connectors match. If the A/V device is equipped with a scart connector you can also connect the transmitter using the scart adapter labelled ‘TRANSMITTER’.

4.In order to also connect the A/V device to ‘TV1’ (your local TV), insert a Mini -DIN/RCA cable between the ‘AV OUT’ of the transmitter and your ‘TV1’. If this TV is equipped with a scart connector you can also connect the transmitter using the included scart adapter labelled ‘AV OUT’.

5.Set to channel selector [A] (A-B-C-D) to A.

6.Insert the plug of one of the power adapters in the ‘DC in’ [E] on the back of the transmitter and plug the power adapter included into a wall socket (230V-50Hz). Please use only the adapter provided!

7.Turn the On/Off switch [B] to ‘ON’.

8.Place the transmitter in an easy accessible spot with enough space around it. Aim the flat side of the dish antenna [K] at the location of the receiver.

9.Put the side antenna [J] in an upright position.

10.Repeat steps 1 to 3 to set up the second A/V device and then turn the On/Off switch [B] to ‘ON’ again.

Video signal and S-VIDEO signal

The connector on the back of the transmitter is no S-VIDEO connector. This is why you can’t connect S-VIDEO signals to the Marmitek GigaVideo80™ but only ‘ordinary’ video signals. If you only have S-VIDEO output on your A/V device or PC (you can recognize an S-VIDEO con- nection by a small round mini DIN plug with 4 pins), then you can use the Marmitek S-VIDEO to composite video adapter (art. no. 09388, not included).

4. SETTING UP THE RECEIVER.

See figures 2 and 4.

1.Turn the On/Off switch [B] to ‘OFF’.

2.Plug the RCA cable into the output on the back of the receiver [L].

3.Plug the other end of this cable into the A/V input of TV2 or the video recorder. Make sure the colours of the plugs and the input connectors match. If the TV is equipped with a scart connector then you can also connect the transmitter using the included scart adapter labelled ‘RECEIVER’.

4.Insert the plug of the remaining power adapter into the DC input [E] on the back of the receiver and plug the power adapter included into a wall socket (230V-50Hz). Please use only the adapter provided!

5.Turn the On/Off switch [B] to ‘ON’.

6.Set to channel selector [A] (A-B-C-D) to A.

4

© MARMITEK

Page 3 Page 5
Image 4
Page 3 Page 5
Contents GIGAVIDEO80GIGAVIDEO80TM Marmitek Safety Warnings ContentsSET Contents IntroductionSetting UP the Transmitter Setting UP the ReceiverVideo signal and S-VIDEO signal See figures 1Setting UP the IR Extender Feature Fine Tuning the GIGAVIDEO80 SETYellow RCA connector RCA Yellow HOW do I Connect the GIGAVIDEO80 to MY PCUsing the GIGAVIDEO80 SET Frequently Asked QuestionsGet no signal Selecting the sourceSignal received is poor Yes. However, the signal will be the same on all receiversDo get images but no sound Can I combine multiple transmitters?Technical Data RangeGIGAVIDEO80TM Sender Sicherheitshinweise InhaltsübersichtEinführung VerpackungsinhaltInstallation DES Senders Transmitter Installation DES Empfängers ReceiverVideo-Signal und S-VIDEO Signal Siehe Abbildungen 1 undInstallation DES IR Verlängerungskabels Installation DES GIGAVIDEO80 AN DEN PCEinstellen DES GIGAVIDEO80 Sets Schalten Sie Ihre A/V Geräte einGelber Cinch-Anschluss RCA gelb Gebrauch DES GIGAVIDEO80 SetsDIN-Stecker S-VIDEO Ich empfange kein Signal Das Signal ist schwachHäufig Gestellte Fragen Selektion der QuelleKönnen mehrere Sender miteinander kombiniert werden? Technische DatenReichweite GIGAVIDEO80TM Emetteur A/V Table DES Matieres Avertissements DE SecuriteContenu DE Lemballage Installation DE Lemetteur Transmitter Installation DU Recepteur ReceiverSignal vidéo composite et signal S-Vidéo Voir image 1 etInstallation DU Cable Dextension IR Pour UNE Meilleure Definition DU SON ET DE LimageConnecter LE GIGAVIDEO80 AU PC Prenez soin d’allumer votre appareil A/VJe nai aucun signal Utilisation DU GIGAVIDEO80 SETQuestions Souvent Posees Une prise DIN prise S-VidéoSuivez les conseils ci-après Le signal est faibleJai l’image mais pas le son Caracteristiques Techniques PortéeGIGAVIDEO80TM Emisor A/V Avisos DE Seguridad ContenidosIntroducción Componentes DEL EquipoConfiguración DEL Emisor Configuración DEL ReceptorVea figuras 1 y Señal de vídeo y señal de S-VIDEOConfiguración DEL Extensor IR Infrarrojo Sintonización DEL Equipo GIGAVIDEO80¿CÓMO Conecto EL GIGAVIDEO80 MI ORDENADOR? Conector RCA amarilloFuncionamiento DEL Equipo GIGAVIDEO80 Preguntas Realizadas FrecuentementeClavija DIN S-VIDEO Selección de la fuenteLa señal recibida no es de buena calidad Recibo imágenes pero no sonido¿Puedo combinar varios receptores? ¿Puedo combinar varios emisores?Especificaciones Técnicas AlcanceGIGAVIDEO80TM Emittente A/V Precauzioni DI Sicurezza SommarioIntroduzione Contenuto DELL’IMBALLOInstallazione DELL’EMITTENTE Transmitter Installazione DEL Ricevitore ReceiverVedi immagini 1 e Segnale video e S-VIDEOInstallazione Della Prolunga IR Installazione DEL GIGAVIDEO80 SUL PCMessa a Punto DEL GIGAVIDEO80 Collegamento RCA gialloUSO DEL GIGAVIDEO80 Domande FrequentiSelezione della fonte Non ricevo un segnale’è l’immagine, ma non c’è suono Si possono utilizzare più ricevitori insieme?Sì, però il segnale sarà lo stesso su tutti i ricevitori Si possono combinare più emettenti?Caratteristiche Tecniche PortataGIGAVIDEO80TM Zender Veiligheidswaarschuwingen InhoudsopgaveIntroductie Inhoud VAN DE VerpakkingInstallatie VAN DE Zender Transmitter Installatie VAN DE Ontvanger ReceiverZie afbeelding 1 en Videosignaal en S-VIDEO signaalInstallatie VAN DE IR Verlengerkabel Installatie VAN DE GIGAVIDEO80 OP DE PCAfstellen VAN DE GIGAVIDEO80 SET Klap de staafantenne J aan de zijkant ophoogGebruik VAN DE GIGAVIDEO80 SET Veel Gestelde VragenGele tulpaansluiting RCA Geel Selecteren van de bronHet ontvangen signaal is zwak Ik heb wel beeld maar geen geluidKunnen meerdere ontvangers met elkaar gebruikt worden? Kunnen meerdere zenders met elkaar worden gecombineerd?Technische Gegevens BereikGIGAVIDEO80TM Declaration of Conformity Copyrights
Top Page Image Contents