Lucent Technologies 1100 manual System Operation Configuration, System Configuration

Introduction

System Operation and

Configuration

The DEFINITY Extender 1100 System is designed for use with a DEFINITY ECS of Release 3, Version 3 or later. The DEFINITY Extender 1100/1101 System consists of two modules. One module, identified as the Switch Module, connects to your DEFINITY ECS. The other module, identified as the Remote Module, connects to your DEFINITY ECS telephone at your off- premise location. Figure 1-1 shows the DEFINITY Extender 1100/1101 System configuration.

Figure 1-1. System Configuration

The modules commu

Figure 1-1. System Configuration

The modules communicate via a single two-wire voice-grade circuit that can extend your DEFINITY® ECS telephone to virtually unlimited distances. See “Specifications” later in this chapter for detailed circuit specifications.

Figure 1-1. System Configuration

1-2Issue 1 June 1998