Lucent Technologies 1100 manual To check a password

Configuration

4.Type your system administrator password (the default is 00000000) and press Enter.

The Password Menu is displayed.

5.Do one of the following:

To check a password:

1.Select Display Password from the Password Menu, and press Enter.

The system prompts you to enter the user’s two-digit user number.

2.Type the user’s two-digit user number, and press Enter.

The user number and the password assigned are displayed.

NOTE:

You cannot display the Administrator Password (user 00). “Admin Password Display Denied” is displayed if user 00 is selected.

To change a password:

1.Select Change Password from the Password Menu, and press Enter.

The system prompts you to enter the new password.

2.Enter the new password (8 to 10 digits), beginning with the remote user’s two-digit code, and press Enter.

3.Repeat for each password you change.

2-14Issue 1 June 1998