Lantronix 2100 manual Cli config-cli level commands, Configure config level commands

	5: Commands and Levels
priority very low	Sets X-Priority for email alerts to 5.
replyto <email address>	Sets Reply-To address for email alerts.
send	Sends an email using the current settings.
server port <number>	Sets the port used by the SMTP server.
show	Displays email settings.
show history	Displays the last 20 commands entered during the current
	CLI session.
show log	Displays the email log.
show statistics	Displays email statistics.
subject <string>	Sets the subject for email alerts.
to <email addresses>	Sets email address to which the email alerts will be sent.
trigger <xio1/xio2> <high/low>	Specifies input name and voltage level to trigger sending
	an email.
write	Stores the current configuration in permanent memory.
cli (config-cli) level commands
clear ssh counters	Sets the SSH counters to zero.
clear telnet counters	Sets the Telnet counters to zero.
clrscrn	Clears the screen.
default quit connect line	Restores the default string used to quit the "connect line "
	command.
enable level password	Sets or removes the enable-level password by challenging
	and prompting.
exit	Exits to the configuration level.
login password	Sets or removes the CLI login password by challenging
	and prompting.
no clear ssh counters	Restores the IP SSH counters to the aggregate values.
no clear telnet counters	Restores the IP Telnet counters to the aggregate values.
quit connect line <string>	Sets the string used to quit the "connect line " command.
show history	Displays the last 20 commands entered during the current
	CLI session.
show ssh	Displays the SSH server settings.
show telnet	Displays the Telnet settings and statistics.
ssh disable	Disables the SSH Server.
ssh enable	Enables the SSH Server.
ssh max sessions <number>	Sets the maximum allowed concurrent incoming SSH
	sessions.
ssh port <number>	Sets the local port that the SSH server uses.
telnet disable	Disables the Telnet Server.
telnet enable	Enables the Telnet Server.
telnet max sessions <number>	Sets the maximum concurrent incoming Telnet sessions.
telnet port <number>	Sets the local port that the Telnet server uses.
write	Stores the current configuration in permanent memory.
configure (config) level commands
arp	Changes to the command level for ARP configuration and
	status.
clear host <host>	Removes an entry from the DNS Cache
cli	Change to menu level for CLI configuration and status
clrscrn	Clears the screen.

IntelliBox-I/O 2100 Command Reference 56