
| 5: Commands and Levels |
|
|
incoming connection manual | Wait for an ATA command before answering an incoming |
| network connection. |
no connect string | Removes optional CONNECT string information for mod- |
| em emulation. |
reassert | Asserts tunnel modem status with current configured val- |
| ues. |
response type numeric | Uses numeric type responses. |
response type text | Uses text type responses. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
status | Displays tunnel modem status. |
verbose response disable | Does not send Modem Response Codes. |
verbose response enable | Sends Modem Response Codes out on the Serial Line. |
write | Stores the current configuration in permanent memory. |
output select | |
clrscrn | Clears the screen. |
default mode | Requires exclusive control of the output for connect mode |
| connection. |
exit | Exits to the next higher level. |
mode exclusive control | Requires exclusive control of the output for connect mode |
| connection. |
mode | Does not require exclusive control of the output for con- |
| nect mode connection. |
no output | Discontinues enabling any output while the connect mode |
| connection is up. |
output <text> | Selects an output to enable while the connect mode con- |
| nection is up. |
show | Shows the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
write | Stores the current configuration in permanent memory. |
output select | |
clrscrn | Clears the screen. |
default mode | Requires exclusive control of the output for accept mode |
| connection. |
exit | Exits to the next higher level. |
mode exclusive control | Requires exclusive control of the output for accept mode |
| connection. |
mode | Does not require exclusive control of the output for accept |
| mode connection. |
no output | Discontinues enabling any output while the accept mode |
| connection is up. |
output <text> | Selects an output to enable while the accept mode con- |
| nection is up. |
show | Shows the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
write | Stores the current configuration in permanent memory. |
output select (tunnel-connect-output_select:1) level commands
80 |