Lantronix 2100 Port number, Icmp config-icmp level commands, If 1 config-ifeth0 level commands

Page 67

 

5: Commands and Levels

 

 

 

cepts when receiving

max timeout <seconds>

Sets the maximum timeout the HTTP server waits when

 

receiving a request.

no clear counters

Restores the HTTP counters to the aggregate values.

port <number>

Sets the port number the HTTP server will use.

server disable

Disables the HTTP server.

server enable

Enables the HTTP server.

show

Displays the HTTP server settings.

show auth

Displays the HTTP server authentication settings.

show history

Displays the last 20 commands entered during the current

 

CLI session.

show log

Displays the HTTP server log.

show statistics

Displays the HTTP statistics.

ssl port <number>

Sets the port number the HTTP server will use over SSL.

ssl3 disable

Disables SSLv3 handling.

ssl3 enable

Enables SSLv3 handling.

tls1.0 disable

Disables TLSv1.0 handling.

tls1.0 enable

Enables TLSv1.0 handling.

tls1.1 disable

Disables TLSv1.1 handling.

tls1.1 enable

Enables TLSv1.1 handling.

write

Stores the current configuration in permanent memory.

icmp (config-icmp) level commands

 

auto show stats

Continuously shows ICMP statistics

clear counters

Zeros counters

clrscrn

Clears the screen.

exit

Exits to the configuration level.

no clear counters

Unzeros IP counters

show

Displays the current configuration.

show history

Displays the last 20 commands entered during the current

 

CLI session.

show stats

Shows ICMP statistics

state disable

Prevents ICMP packets from being sent or received.

state enable

Allows ICMP packets to be sent and received.

write

Stores the current configuration in permanent memory.

if 1 (config-if:eth0) level commands

 

bootp disable

Disables BOOTP.

bootp enable

Enables BOOTP.

clear host <string>

Removes an entry from the DNS Cache

clrscrn

Clears the screen.

default gateway <IP address>

Sets the configurable gateway IP address to the default

 

value.

dhcp client id binary <binary>

Sets the client id allowing binary characters.

dhcp client id set <text>

Sets the client id in text format.

dhcp disable

Disables DHCP.

dhcp enable

Enables DHCP.

dhcp renew

Force DHCP to renew

domain <text>

Sets the domain name.

IntelliBox-I/O 2100 Command Reference

67

Image 67
Contents IntelliBox-I/O 2100 Command Reference Date Rev Comments Copyright and TrademarkCommands and Levels Table of ContentsCommand Line Interface Configuration Using XMLCLI Level Hierarchy List of FiguresList of Tables Convention Description Chapter SummariesConventions Chapter SummaryDocument Description Additional DocumentationXML Architecture and Device Control OverviewConfiguration Using Serial Ports Configuration Using TelnetNavigating the CLI Hierarchy Command Line InterfaceUnderstanding the CLI Level Hierarchy Using Keyboard Shortcuts and CLICLI Level Hierarchy Enable Level Commands XML Configuration Record Document Type Definition Configuration Using XMLDeclaration Quick Tour of XML SyntaxXML Group Example Record, Group, Item, and Value TagsXML Example of Multiple Items Importing and Exporting an XML Configuration FileImporting Best PracticesExporting XCR Groups XML Configuration GroupsConfiguration Using XML None Event trak Step Name URI Configuration Using XML Cidr Configuration Using XML Configuration Using XML Configuration Using XML Configuration Using XML Unknown Configuration Using XML Configuration Using XML Group Name Item Name Value Name Valid Values XML Status Record Groups and ItemsConfiguration Using XML Configuration Using XML Configuration Using XML Arpa Configuration Using XML UDP Configuration Using XML Configuration Using XML Configuration Using XML Configuration Using XML Configuration Using XML Configuration Using XML Configuration Using XML Commands and Levels Accept tunnel-accept2 level commands Commands and LevelsAccept tunnel-accept1 level commands Commands and Levels Chem 1 chem1 level commands Arp config-arp level commandsTrigger xio1/xio2 high/low Chem 2 chem2 level commandsReplyto email address To email addressesChem 3 chem3 level commands Chem 4 chem4 level commands Configure config level commands Cli config-cli level commandsLpd line Connect tunnel-connect2 level commandsHost number If instanceConnect mode any character Connect tunnel-connect1 level commands Device device level commands Timeout milliseconds Disconnect tunnel-disconnect2 level commandsEnable enable level commands Disconnect tunnel-disconnect1 level commandsLine line Eventtrak 1 config-eventtrak1 level commands Filesystem filesystem level commands Eventtrak 2 config-eventtrak2 level commandsCLI session File host port Touch file Create a fileThis host is Auth user uri user password Http config-http level commandsAuth uri realm If 1 config-ifeth0 level commands Icmp config-icmp level commandsPort number Ip address ip address/cidr Io io level commandsIp config-ip level commands Ip filter config-filter level commandsBaud rate bits per second Line 1 line1 level commandsAdd ip address subnet mask Remove ip address subnet maskLine 2 line2 level commands Commands and Levels Lpd lpd level commands Link config-etherneteth0 level commandsTest print number of lines Lpd 1 config-lpd1 level commandsKill line Show lineMatch 1 config-eventtrak-match2.1 level commands Lpd 2 config-lpd2 level commandsMatch 1 config-eventtrak-match1.1 level commands Match 2 config-eventtrak-match1.2 level commands Match 2 config-eventtrak-match2.2 level commandsMatch 3 config-eventtrak-match1.3 level commands Match 3 config-eventtrak-match2.3 level commandsModem tunnel-modem2 level commands Modbus modbus level commandsModem tunnel-modem1 level commands Output select tunnel-accept-outputselect2 level commands Output select tunnel-connect-outputselect2 level commandsOutput select tunnel-connect-outputselect1 level commands Packing tunnel-packing2 level commands Output select tunnel-accept-outputselect1 level commandsQuery port config-queryport level commands Packing tunnel-packing1 level commandsRoot level commands Snmp config-snmp level commands Rss config-rss level commandsSerial tunnel-serial2 level commands Serial tunnel-serial1 level commandsSsh ssh level commands Ssl ssl level commands Host user user passwordHost user user password public Host user user password public publicLevel severity Task 1 config-eventtrak-task2.1 level commandsTask 2 config-eventtrak-task2.2 level commands Task 1 config-eventtrak-task1.1 level commandsStep letter Task 2 config-eventtrak-task1.2 level commands Task 3 config-eventtrak-task2.3 level commands Task 3 config-eventtrak-task1.3 level commands Terminal 1 config-terminal1 level commands Tcp config-tcp level commandsTerminal network config-terminalnetwork level commands Terminal 2 config-terminal2 level commandsTunnel 1 tunnel1 level commands Tftp config-tftp level commandsTunnel 2 tunnel2 level commands Udp config-udp level commands
Related manuals
Manual 79 pages 2.62 Kb