Lantronix 2100 manual Connect tunnel-connect1 level commands

Page 59

 

5: Commands and Levels

 

 

protocol udp aes

Uses UDP protocol with AES encryption for connect mode

 

tunneling.

reconnect time <milliseconds>

Sets the reconnect time value for tunneling connections

 

established by the

remote address <text>

Sets the remote host to establish tunneling connections

 

with.

remote port <number>

Sets the remote port to use for connect mode tunneling.

show

Displays the current configuration.

show history

Displays the last 20 commands entered during the current

 

CLI session.

show status

Displays tunnel connect status.

ssh username <text>

Sets the SSH user name for use when establishing tunne-

 

ling connections

tcp keep alive <milliseconds>

Enables TCP keep alive for connect mode tunneling and

 

sets the timer.

write

Stores the current configuration in permanent memory.

connect (tunnel-connect:1) level commands

 

aes decrypt key <hexadecimal>

Sets the connect tunnel AES decrypt key with up to 16

 

bytes.

aes decrypt key text <text>

Sets the connect tunnel AES decrypt key with up to 16

 

bytes.

aes encrypt key <hexadecimal>

Sets the connect tunnel AES encrypt key with up to 16

 

bytes.

aes encrypt key text <text>

Sets the connect tunnel AES encrypt key with up to 16

 

bytes.

block network disable

Forwards (tunnels) network data in connect mode tunne-

 

ling.

block network enable

Discards all data coming in from the connect mode tunnel

 

before forwarding

block serial disable

Forwards (tunnels) serial data in connect mode tunneling.

block serial enable

Discards all data coming in from the serial interface before

 

forwarding

clrscrn

Clears the screen.

connect mode always

Enables the tunneling server to always establish tunneling

 

connections.

connect mode any character

Enables the tunneling server to establish a tunneling con-

 

nection when a

connect mode disable

Disables connect mode tunneling.

connect mode modem control asserted

Enables the tunneling server to make tunneling connec-

 

tions when the modem

connect mode modem emulation

Enables modem emulation for connect mode tunneling.

connect mode start character

Enables connect mode tunneling when the configured

 

start character

default connect mode

Restores the default connect mode as "disable".

default local port

Uses a random port number as the local port for establish-

 

ing tunneling

default protocol

Restores the default protocol as "TCP".

default reconnect time

Restores the default reconnect time value for connect

 

mode tunneling.

default tcp keep alive

Restores the default 45 second connect mode TCP keep

 

alive timeout.

IntelliBox-I/O 2100 Command Reference

59

Image 59
Contents IntelliBox-I/O 2100 Command Reference Date Rev Comments Copyright and TrademarkCommands and Levels Table of ContentsCommand Line Interface Configuration Using XMLCLI Level Hierarchy List of FiguresList of Tables Convention Description Chapter SummariesConventions Chapter SummaryDocument Description Additional DocumentationXML Architecture and Device Control OverviewConfiguration Using Serial Ports Configuration Using TelnetNavigating the CLI Hierarchy Command Line InterfaceUnderstanding the CLI Level Hierarchy Using Keyboard Shortcuts and CLICLI Level Hierarchy Enable Level Commands XML Configuration Record Document Type Definition Configuration Using XMLDeclaration Quick Tour of XML SyntaxXML Group Example Record, Group, Item, and Value TagsXML Example of Multiple Items Importing and Exporting an XML Configuration FileImporting Best PracticesExporting XCR Groups XML Configuration GroupsConfiguration Using XML None Event trak Step Name URI Configuration Using XML Cidr Configuration Using XML Configuration Using XML Configuration Using XML Configuration Using XML Unknown Configuration Using XML Configuration Using XML Group Name Item Name Value Name Valid Values XML Status Record Groups and ItemsConfiguration Using XML Configuration Using XML Configuration Using XML Arpa Configuration Using XML UDP Configuration Using XML Configuration Using XML Configuration Using XML Configuration Using XML Configuration Using XML Configuration Using XML Configuration Using XML Commands and Levels Accept tunnel-accept2 level commands Commands and LevelsAccept tunnel-accept1 level commands Commands and Levels Chem 1 chem1 level commands Arp config-arp level commandsTrigger xio1/xio2 high/low Chem 2 chem2 level commandsReplyto email address To email addressesChem 3 chem3 level commands Chem 4 chem4 level commands Configure config level commands Cli config-cli level commandsLpd line Connect tunnel-connect2 level commandsHost number If instanceConnect mode any character Connect tunnel-connect1 level commands Device device level commands Timeout milliseconds Disconnect tunnel-disconnect2 level commandsLine line Disconnect tunnel-disconnect1 level commandsEnable enable level commands Eventtrak 1 config-eventtrak1 level commands Filesystem filesystem level commands Eventtrak 2 config-eventtrak2 level commandsThis host is File host port Touch file Create a fileCLI session Auth uri realm Http config-http level commandsAuth user uri user password Port number Icmp config-icmp level commandsIf 1 config-ifeth0 level commands Ip address ip address/cidr Io io level commandsIp config-ip level commands Ip filter config-filter level commandsBaud rate bits per second Line 1 line1 level commandsAdd ip address subnet mask Remove ip address subnet maskLine 2 line2 level commands Commands and Levels Lpd lpd level commands Link config-etherneteth0 level commandsTest print number of lines Lpd 1 config-lpd1 level commandsKill line Show lineMatch 1 config-eventtrak-match2.1 level commands Lpd 2 config-lpd2 level commandsMatch 1 config-eventtrak-match1.1 level commands Match 2 config-eventtrak-match1.2 level commands Match 2 config-eventtrak-match2.2 level commandsMatch 3 config-eventtrak-match1.3 level commands Match 3 config-eventtrak-match2.3 level commandsModem tunnel-modem2 level commands Modbus modbus level commandsModem tunnel-modem1 level commands Output select tunnel-connect-outputselect1 level commands Output select tunnel-connect-outputselect2 level commandsOutput select tunnel-accept-outputselect2 level commands Packing tunnel-packing2 level commands Output select tunnel-accept-outputselect1 level commandsRoot level commands Packing tunnel-packing1 level commandsQuery port config-queryport level commands Snmp config-snmp level commands Rss config-rss level commandsSerial tunnel-serial2 level commands Serial tunnel-serial1 level commandsSsh ssh level commands Ssl ssl level commands Host user user passwordHost user user password public Host user user password public publicLevel severity Task 1 config-eventtrak-task2.1 level commandsStep letter Task 1 config-eventtrak-task1.1 level commandsTask 2 config-eventtrak-task2.2 level commands Task 2 config-eventtrak-task1.2 level commands Task 3 config-eventtrak-task2.3 level commands Task 3 config-eventtrak-task1.3 level commands Terminal 1 config-terminal1 level commands Tcp config-tcp level commandsTerminal network config-terminalnetwork level commands Terminal 2 config-terminal2 level commandsTunnel 1 tunnel1 level commands Tftp config-tftp level commandsTunnel 2 tunnel2 level commands Udp config-udp level commands
Related manuals
Manual 79 pages 2.62 Kb