| 5: Commands and Levels |
|
|
email connect <number> | Sets an email profile to use to send an email alert upon |
| establishing |
email disconnect <number> | Sets an email profile to use to send an email alert upon |
| closing |
exit | Returns to the tunnel level. |
flush serial disable | Characters already in the serial data buffer are retained |
| upon establishing |
flush serial enable | Flushes the serial data buffer upon establishing a connect |
| mode tunneling |
kill connection | Disconnects the active connect mode tunneling connec- |
| tion. |
local port <number> | Sets a specific port for use as the local port. |
no aes decrypt key | Removes the connect tunnel AES decrypt key. |
no aes encrypt key | Removes the connect tunnel AES encrypt key. |
no email connect | Discontinues sending email alerts upon establishing a |
| connect mode tunnel. |
no email disconnect | Discontinues sending email alerts upon closing a connect |
| mode tunnel. |
no remote address | Removes the remote host address used to establish |
| tunneling connections. |
no remote port | Removes the remote port used to establish tunnel con- |
| nections. |
no ssh username | Removes the SSH user name. |
no tcp keep alive | Disables the connect mode TCP keep alive timeout. |
output select | Enters the next lower level. |
protocol ssh | Uses SSH protocol for connect mode tunneling. |
protocol ssl | Uses SSL protocol for connect mode tunneling. |
protocol tcp | Uses TCP protocol for connect mode tunneling. |
protocol tcp aes | Uses TCP protocol with AES encryption for connect mode |
| tunneling. |
protocol telnet | Uses Telnet protocol (with IAC) for connect mode tunne- |
| ling. |
protocol udp | Uses UDP protocol for connect mode tunneling. |
protocol udp aes | Uses UDP protocol with AES encryption for connect mode |
| tunneling. |
reconnect time <milliseconds> | Sets the reconnect time value for tunneling connections |
| established by the |
remote address <text> | Sets the remote host to establish tunneling connections |
| with. |
remote port <number> | Sets the remote port to use for connect mode tunneling. |
show | Displays the current configuration. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
show status | Displays tunnel connect status. |
ssh username <text> | Sets the SSH user name for use when establishing tunne- |
| ling connections |
tcp keep alive <milliseconds> | Enables TCP keep alive for connect mode tunneling and |
| sets the timer. |
write | Stores the current configuration in permanent memory. |
device (device) level commands |
|
60 |