Lantronix 2100 manual Commands and Levels

	5: Commands and Levels
command mode echo serial string disable	Disables user-defined serial boot string to be echoed in
	the CLI.
command mode echo serial string enable	Enables user-defined serial boot string to be echoed in the
	CLI.
command mode serial string	Enables user to enter a custom string at boot time to enter
	command mode.
command mode serial string <string>	Sets a string that can be entered at boot time to enter
	command mode.
command mode serial string binary <string>	Sets a binary string that can be entered at boot time to
	enter command mode.
command mode signon message <string>	Sets an ASCII sign-on message that is sent from the seri-
	al port when the
command mode signon message binary <string>	Sets a binary sign-on message that is sent from the serial
	port when the
command mode wait time <milliseconds>	Sets boot-up wait time for command mode serial string.
data bits 7	Uses seven bits for data on the line.
data bits 8	Uses eight bits for data on the line.
default baud rate	Restores the default speed of 9600 bits per second.
default data bits	Restores the default of eight data bits.
default flow control	Restores the default of no flow control.
default interface	Restores the default interface type to this line.
default parity	Restores the default of no parity.
default protocol	Restores the default protocol on the line.
default stop bits	Restores the default of one stop bit.
default xoff char	Restores the default xoff character on this line.
default xon char	Restores the default xon character on this line.
exit	Exits to the enable level
flow control hardware	Uses hardware (RTS/CTS) flow control on the line.
flow control none	Does not provide flow control on the line.
flow control software	Uses software (xon/xoff characters) flow control on the
	line.
interface rs232	Sets the line interface to RS232.
interface rs485 full-duplex	Sets the line interface to RS485 in full-duplex mode.
interface rs485 half-duplex	Sets the line interface to RS485 in half-duplex mode.
line <line>	Enters the line level.
lpd <line>	Enters the configure lpd level.
name <text>	Sets the name for this line.
no clear line counters	Restores the serial counters to the aggregate values.
no command mode	Disables command mode for the current line.
no command mode serial string	Prevents the user-defined serial boot string from being
	used to enter
no command mode signon message	Clears the signon message displayed at boot time and
	when entering
no name	Removes the name of this line.
parity even	Uses a parity bit on the line for even parity.
parity none	Does not use a parity bit on the line.
parity odd	Uses a parity bit on the line for odd parity.
protocol lpd	Applies Line Printer Daemon (LPD) protocol on the line.

IntelliBox-I/O 2100 Command Reference 71