Lantronix 2100 manual Step letter, Task 1 config-eventtrak-task1.1 level commands

	5: Commands and Levels
	CLI session.
step <letter>	Changes to the command level for EventTrak Task Step
	configuration.
task <number>	Changes to the command level for EventTrak Task confi-
	guration.
write	Stores the current configuration in permanent memory.
task 1 (config-eventtrak-task:1.1) level commands
activity none	Sets the EventTrak task activity to None.
activity output <number>	Sets the EventTrak task activity to control the designated
	output pin.
activity ping	Sets the EventTrak task activity to send a ping once per
	second.
clrscrn	Clears the screen.
default activity	Sets the default EventTrak task activity, which is None.
default description	Removes the description of an EventTrak control task.
default output control	Sets the default EventTrak output control, which is Exclu-
	sive.
description <text>	Sets the description of an EventTrak control task. It will
	appear in
exit	Exits to the EventTrak level.
match <number>	Changes to the command level for EventTrak Match con-
	figuration.
no ping address	Removes the EventTrak ping address.
output control exclusive	Sets the EventTrak output control to exclusive, so if the
	activity is to
output control logical-or	Sets the EventTrak output control to be Logical-Or, so it
	may be combined
ping address <text>	Sets the EventTrak ping address to be used when the
	activity is to send
rss trace ping responses disable	Turns off RSS tracing of EventTrak ping responses.
rss trace ping responses enable	Turns on RSS tracing of ping responses received by this
	EventTrak task.
rss trace steps disable	Turns off RSS tracing of EventTrak task steps.
rss trace steps enable	Turns on RSS tracing of each step taken by an EventTrak
	task.
rss trace triggers disable	Turns off RSS tracing of EventTrak task triggers.
rss trace triggers enable	Turns on RSS tracing of triggers emitted by this EventTrak
	task.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
step <letter>	Changes to the command level for EventTrak Task Step
	configuration.
task <number>	Changes to the command level for EventTrak Task confi-
	guration.
write	Stores the current configuration in permanent memory.
task 2 (config-eventtrak-task:2.2) level commands
activity none	Sets the EventTrak task activity to None.
activity output <number>	Sets the EventTrak task activity to control the designated
	output pin.

IntelliBox-I/O 2100 Command Reference 87