Lantronix 2100 manual Match 3 config-eventtrak-match2.3 level commands

	5: Commands and Levels
no string	Removes the EventTrak monitoring match string.
no wildcard	Removes the EventTrak wildcard character.
rss trace matches disable	Turns off RSS tracing of EventTrak string matches.
rss trace matches enable	Turns on RSS tracing to post each time EventTrak
	matches the string.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
string binary <binary>	Sets the EventTrak monitoring match string allowing for
	binary characters.
string set <text>	Sets the EventTrak monitoring match string.
task <number>	Changes to the command level for EventTrak Task confi-
	guration.
timeout milliseconds <number>	Sets the EventTrak monitoring timeout milliseconds. Old
	data that might
wildcard <text>	Sets the EventTrak monitoring wildcard character. Where
	it is placed in the
write	Stores the current configuration in permanent memory.
match 3 (config-eventtrak-match:2.3) level commands
case sensitive no	Sets EventTrak monitoring to be insensitive to case, so
	either a or A will
case sensitive yes	Sets EventTrak monitoring to be case sensitive, requiring
	an exact match.
clrscrn	Clears the screen.
default case sensitive	Sets the default EventTrak monitoring case sensitivity,
	which is not case
default timeout milliseconds	Restores the default EventTrak monitoring timeout.
exit	Exits to the EventTrak level.
match <number>	Changes to the command level for EventTrak Match con-
	figuration.
no string	Removes the EventTrak monitoring match string.
no wildcard	Removes the EventTrak wildcard character.
rss trace matches disable	Turns off RSS tracing of EventTrak string matches.
rss trace matches enable	Turns on RSS tracing to post each time EventTrak
	matches the string.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
string binary <binary>	Sets the EventTrak monitoring match string allowing for
	binary characters.
string set <text>	Sets the EventTrak monitoring match string.
task <number>	Changes to the command level for EventTrak Task confi-
	guration.
timeout milliseconds <number>	Sets the EventTrak monitoring timeout milliseconds. Old
	data that might
wildcard <text>	Sets the EventTrak monitoring wildcard character. Where
	it is placed in the
write	Stores the current configuration in permanent memory.
match 3 (config-eventtrak-match:1.3) level commands
case sensitive no	Sets EventTrak monitoring to be insensitive to case, so

IntelliBox-I/O 2100 Command Reference 77