Lantronix 2100 manual Terminal 2 config-terminal2 level commands

	5: Commands and Levels
	tings.
send break <control>	Sets the optional send break character.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
terminal <line>	Enters the configure-terminal level.
terminal network	Enters the configure-terminal level for the network.
terminal type <text>	Sets the terminal type.
tunnel <line>	Enters the tunnel level.
write	Stores the current configuration in permanent memory.
terminal 2 (config-terminal:2) level commands
break duration <milliseconds>	Sets how long a break should last when it is being sent to
	the line.
clrscrn	Clears the screen.
default break duration	Restores the break duration to the default value (500 ms).
default terminal type	Sets the default terminal type, "UNKNOWN".
echo disable	Disables echoing of characters received on the line back
	to the line.
echo enable	Enables echoing of characters received on the line back
	to the line.
exit	Exits to the configuration level.
exit connect menu disable	On the login connect menu, removes the menu item allow-
	ing the user to exit
exit connect menu enable	On the login connect menu, inserts the menu item allow-
	ing the user to exit
line <line>	Enters the line level.
login connect menu disable	Disables the login connect menu, so a user will get the
	CLI immediately
login connect menu enable	Enables the login connect menu, so a user will get the
	menu rather than the
lpd <line>	Enters the configure lpd level.
no send break	Removes the configured send break character.
preview connect menu	Shows the layout of the connect menu with current set-
	tings.
send break <control>	Sets the optional send break character.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
terminal <line>	Enters the configure-terminal level.
terminal network	Enters the configure-terminal level for the network.
terminal type <text>	Sets the terminal type.
tunnel <line>	Enters the tunnel level.
write	Stores the current configuration in permanent memory.
terminal network (config-terminal:network) level commands
break duration <milliseconds>	Sets how long a break should last when it is being sent to
	the line.
clrscrn	Clears the screen.
default break duration	Restores the break duration to the default value (500 ms).
default terminal type	Sets the default terminal type, "UNKNOWN".

IntelliBox-I/O 2100 Command Reference 92