Lantronix 2100 manual Tcp config-tcp level commands, Terminal 1 config-terminal1 level commands

	5: Commands and Levels
step <letter>	Changes to the command level for EventTrak Task Step
	configuration.
task <number>	Changes to the command level for EventTrak Task confi-
	guration.
write	Stores the current configuration in permanent memory.
tcp (config-tcp) level commands
ack limit <packets>	Sets the number of packets that must be received before
	an ACK is forced.
auto show stats	Continuously shows TCP statistics
clear counters	Zeros TCP counters
clrscrn	Clears the screen.
default ack limit	Restores the default ack limit of 3 packets.
default send data	Sets TCP to send data in accordance with standards.
exit	Exits to the configuration level.
no clear counters	Unzeros TCP counters
resets disable	Does not send TCP RSTs upon connection to unused
	ports.
resets enable	Sends TCP RSTs upon connection to unused ports.
send data expedited	Sets TCP to send data whenever the window is sufficient-
	ly open, for improved
send data standard	Sets TCP to send data in accordance with standards.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
show stats	Shows TCP statistics
write	Stores the current configuration in permanent memory.
terminal 1 (config-terminal:1) level commands
break duration <milliseconds>	Sets how long a break should last when it is being sent to
	the line.
clrscrn	Clears the screen.
default break duration	Restores the break duration to the default value (500 ms).
default terminal type	Sets the default terminal type, "UNKNOWN".
echo disable	Disables echoing of characters received on the line back
	to the line.
echo enable	Enables echoing of characters received on the line back
	to the line.
exit	Exits to the configuration level.
exit connect menu disable	On the login connect menu, removes the menu item allow-
	ing the user to exit
exit connect menu enable	On the login connect menu, inserts the menu item allow-
	ing the user to exit
line <line>	Enters the line level.
login connect menu disable	Disables the login connect menu, so a user will get the
	CLI immediately
login connect menu enable	Enables the login connect menu, so a user will get the
	menu rather than the
lpd <line>	Enters the configure lpd level.
no send break	Removes the configured send break character.
preview connect menu	Shows the layout of the connect menu with current set-

IntelliBox-I/O 2100 Command Reference 91