
| 5: Commands and Levels |
|
|
eventtrak <number> | Changes to the command level for EventTrak configura- |
| tion. |
exit | Exits to the enable level. |
ftp | Enters the ftp level. |
host <number> | Change to config host level |
http | Enters the http level. |
icmp | Changes to the command level for ICMP configuration |
| and status. |
if <instance> | Changes to the interface configuration level. |
ip | Changes to the command level for IP configuration and |
| status. |
ip filter | Enters the |
kill ssh <session> | Kills SSH session with index from "show sessions" |
kill telnet <session> | Kills Telnet session with index from "show sessions" |
lpd <line> | Enters the configure lpd level. |
modbus | Changes to the modbus configuration level. |
query port | Enters the query port level. |
rss | Change to menu level for RSS configuration and status |
show | Displays system information. |
show history | Displays the last 20 commands entered during the current |
| CLI session. |
snmp | Enters the snmp level. |
syslog | Enters the syslog level. |
tcp | Changes to the command level for TCP configuration and |
| status. |
terminal <line> | Enters the |
terminal network | Enters the |
tftp | Enters the tftp level. |
udp | Changes to the command level for UDP configuration and |
| status. |
write | Stores the current configuration in permanent memory. |
connect |
|
aes decrypt key <hexadecimal> | Sets the connect tunnel AES decrypt key with up to 16 |
| bytes. |
aes decrypt key text <text> | Sets the connect tunnel AES decrypt key with up to 16 |
| bytes. |
aes encrypt key <hexadecimal> | Sets the connect tunnel AES encrypt key with up to 16 |
| bytes. |
aes encrypt key text <text> | Sets the connect tunnel AES encrypt key with up to 16 |
| bytes. |
block network disable | Forwards (tunnels) network data in connect mode tunne- |
| ling. |
block network enable | Discards all data coming in from the connect mode tunnel |
| before forwarding |
block serial disable | Forwards (tunnels) serial data in connect mode tunneling. |
block serial enable | Discards all data coming in from the serial interface before |
| forwarding |
clrscrn | Clears the screen. |
connect mode always | Enables the tunneling server to always establish tunneling |
57 |