Lantronix 2100 manual Http config-http level commands, Auth uri realm, Auth user uri user password

	5: Commands and Levels
no remote address	Clears the remote address of the host.
no ssh username	Clears the SSH username associated with the host.
protocol ssh	Sets the protocol to SSH.
protocol telnet	Sets the protocol to Telnet.
remote address <text>	Sets the IP address of the remote host to connect to when
	this host is
remote port <number>	Sets the remote port used to connect to the host.
show	Displays the current configuration.
show history	Displays the last 20 commands entered during the current
	CLI session.
ssh username <text>	Sets the username for logging into the host via SSH.
write	Stores the current configuration in permanent memory.
http (config-http) level commands
auth <uri> <realm>	Creates a new HTTP server authentication directive.
auth type <uri> basic	Sets an HTTP server authentication directive to the Basic
	Access
auth type <uri> digest	Sets an HTTP server authentication directive to the Digest
	Access
auth type <uri> none	Sets the authentication type for an HTTP server authenti-
	cation directive to
auth type <uri> ssl	Sets the authentication type for an HTTP server authenti-
	cation directive to SSL.
auth type <uri> ssl-basic	Sets the authentication type for an HTTP server authenti-
	cation directive
auth type <uri> ssl-digest	Sets the authentication type for an HTTP server authenti-
	cation directive
auth user <uri> <user> <password>	Creates or modifies a user for an HTTP server authentica-
	tion directive.
clear counters	Sets the HTTP counters to zero.
clear log	Clears the HTTP server log.
clrscrn	Clears the screen.
default log format	Restores the HTTP Server log format string to its default
	value.
default log max entries	Restores the default maximum number of HTTP Server
	log entries.
default max bytes	Resets the default maximum bytes the HTTP Server will
	accept when receiving
default max timeout	Resets the default maximum time the HTTP Server will
	wait when receiving
default port	Resets the HTTP Server port to its default value.
default ssl port	Resets the HTTP Server SSL port to its default value.
delete auth <uri>	Deletes an existing HTTP Server authentication directive.
delete auth user <uri> <user>	Deletes an existing user for an HTTP Server authentica-
	tion directive.
exit	Returns to the config level.
log disable	Disables HTTP server logging.
log enable	Enables HTTP server logging.
log format <string>	Sets the log format string for the HTTP server, using the
	following
max bytes <bytes>	Sets the maximum number of bytes the HTTP server ac-

IntelliBox-I/O 2100 Command Reference 66