GarrettCom 6K8 manual Introduction Inspecting the Package and Product

Magnum 6K8-Series Industrial Field Switch Installation and User Guide (04/07)

2.0Introduction

2.1Inspecting the Package and Product

Examine the shipping container for obvious damage prior to installing this

product; notify the carrier of any damage that you believe occurred during shipment or delivery. Inspect the contents of this package for any signs of damage and ensure that the items listed below are included.

This package should contain:

1Magnum 6K8-Series Industrial Field Switch, base unit (configured with user-selected port module options installed)

1 AC Power Cord (U.S. and other 115 VAC only) if AC version

1Set of two metal vertical mounting brackets, with screws to the case

1Installation and User Guide (this manual)

1Product Registration Card

Remove the items from the shipping container. Be sure to keep the shipping container should you need to re-ship the unit at a later date. To validate the product warranty, please complete and return the enclosed Product Registration Card to GarrettCom, Inc. as soon as possible.

In the event there are items missing or damaged, contact the party from whom you purchased the product. If the unit needs to be returned, please use the original shipping container if possible. Refer to Section 6, Troubleshooting, for specific return procedures.

NOTE: This Hardware user- manual only contains the hardware related information about the Magnum 6K8 and provides help for Network installation, wiring, and other hardware features. Refer to our Software user Manual for management software features and configurations (e.g. VLANS, RSTP, SNMP, RADIUS, TACACS etc.) using this URL- www.garrettcom.com/techsupport/software/userguides/6kseries_softugrel3.pdf

www . GarrettCom . com

7