GarrettCom 6K8 manual Four-Port 10 MB and 100Mb mm Fiber ST Modules

Magnum 6K8-Series Industrial Field Switch Installation and User Guide (04/07)

2.2.5New PoE (Power Pass-through), model P6KP8-RJ45 (MDIX), 10/100Mb 8-

port

The PoE (Power-pass-through) RJ-45 ports act similar to regular RJ-45 ports, except they have the

			6KP8-45RJ					capability of providing
8 Port@ 10/100Mb Copper ports
								power on each port to
		1		3	5		2	power up the PD devices,
							1
	10/10				LK/AC			per the IEEE802.3af PoE
					POE
	F/ H	2		4
					6			standard. The Power Pass-
	10/10				LK/AC
	F/H				POE	4	3	through PoE modules are
1	LK/ACT			2	10/10			totally dependent upon the
	LINK							powerful -48VDC input
3	PoE			4	FULL/HALF			power supply to support

more RJ-45 (10/100) ports. Each port requires at least 15watts to power up the PoE PD devices. Maxm. one PoE modules can be configured in the A or B slot of any 6K16s with -48vdc power input. The PoE modules are also available to mix –n-match with fiber modules. Please check the ordering information Sec.1.2 for all the various P6K PoE module options.

The LEDs on 6KP8-RJ45- PoE modules are slightly different compared to regular (non-PoE) RJ-45 modules as shown in Fig 2. When the PoE port is in use, the PoE LED is ON when connected properly to an 803.af compliant PD device on that port. When non-PoE devices are connected, the PoE LED is OFF. PoE does not affect operation of Ethernet data traffic.

LINK and ACTIVITY LEDS are combined on the PoE modules into one LED that is marked as LINK/ACT, as shown in the diagram.

2.2.6Four-Port 10 MB and 100Mb mm Fiber ST Modules

ACT			ACT
F/H			F/H
1	TX	LK RX	5	TX	LK RX
ACT			ACT
F/H			F/H	T	LK	R
2	TX	LK RX	6

The 4-port @10Mb ST fiber modules behave the same as the 4@100Mb ST fiber modules except for the 10Mb speed. For port numbering, ports 1, 2, 5, 6 are present, ports 3, 4. 7, 8 are not present. There is also a similar 100Mb fiber SC module.

www . GarrettCom . com

14