GarrettCom Dual speed copper ports, Segments. When installed in a, Magnum 6K8-Series Managed

Page 55

Magnum 6K8-Series Industrial Field Switch

Installation and User Guide (04/07)

5.2.16KP6-RJMST, 4@10/100Mbps RJ-45 and 2@100Mb multi- mode FX-ST “twist lock” Combo Module

The Magnum 6KP6-RJMST is a combo 6-port module of four RJ-45’s at 10/100Mbps and two fiber optic ports at 100MB. The Combo module is equipped with dual-mode ST-type connectors

and dual speed copper ports.

 

6KP6-RJMST,

 

 

4 Port@ 10/100Mbps and 2 @100 Mb ST Fiber Port

 

The ST-connector functions as

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

a fiber optic transceiver to

 

1

3

5

7

 

1

support 100BASE-FX network

 

10/100

 

 

 

LK

 

 

 

 

 

 

 

 

segments. When installed in a

 

F/H

 

 

 

ACT

 

 

 

 

 

 

 

4

ACT

 

ACT

 

 

 

Magnum 6K8-Series Managed

F/H

 

F/H

TX LK

RX

3

 

2 TX

LKRX

6

 

 

 

Switch, the copper port

1

LINK

 

2

10/100

 

 

supports the standard distance

3

ACTIVITY

4

FULL/HALF

 

100m on each port and the fiber

 

 

 

 

 

 

 

 

port supports fiber optic cable distances up the IEEE-standard 100Mbps distance limits, i.e., typically 2km at full-duplex and 412m at half-duplex.

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed, if the LED is ON 100Mbps if it is OFF 10Mbps.

5.2.1a 6KP6-RJ10ST, 4@10/100Mbps RJ-45 and 2@10Mb multi-mode FX-ST “twist lock” Combo Module

The 6KP6-RJ10ST is a six-port combo module that looks similar to the 100Mb combo module with the exception of 10Mb speed at the ST fiber module. The ST-connector functions as a fiber optic transceiver to support 10BASE-FX network segments. When installed in a Magnum 6K8-Series Managed Switch, the copper port supports the standard distance 100m on each port and the fiber port supports fiber optic cable distances up the IEEE-standard 10Mbps distance limits, i.e., typically 2km at full- duplex and half-duplex.

Each port has an Activity (ACT) LED indicating packets being received, a

www . GarrettCom . com

50

Image 55
Contents Industrial Field Switch Trademarks Canadian Emission Contacting GarrettCom, IncInstallation Table of ContentsIntroduction 14 6KM-BLNK TroubleshootingOverview Magnum LineMaximum 10 Mbps Ethernet Segment Lengths Technical SpecificationsPerformance Network Standards and Compliance, hardwareManagement Console connector Fiber Multi-mode connector types supportedFiber Single-mode connector types Alarm Relay ContactsAgency Approvals Magnum 6K8 DC Power Supply OptionsPer-port MDI or Mdix on RJ-45 MountingsOrdering Information Configuration OptionsMagnum 6K8 Port Modules GBIC1000Mb Transceiver options for Mangum 6K8-Series Introduction Inspecting the Package and Product Product Description Magnum 6K8-Series 6K8 1a Magnum 6K8-Series, Industrial Field Switch Www . GarrettCom . com Eight-port SFF fiber modules 6K8-MTRJ, 6K8-MLC, 100Mb Fiber Normally are set factory default toOperate in full-duplex mode for best Fiber distance and performance. UsingNegotiation is not disabled FDX/HDX LED is on to When lit. The 10/100 LED Indicates operation at 100MbSpeed when on and at 10 MB Speed when OFF when autoST or SC @RJ-45 + 2@ 100MbFour-Port 10 MB and 100Mb mm Fiber ST Modules Gigabit 1000Mbps port modules 7a GBPM-2OTX Two Gigabit port option Packet Prioritization, 802.1p QOS Gbic DescriptionManaged Network Software MNS-6K for Magnum 6K8-Series Frame Buffering and Flow ControlWww . GarrettCom . com „ Large selection of built-in fiber options at 10/100/1000Mb Applications Interne Control Center Scada Mounting Instructions Copper Locating Magnum 6K8-Series SwitchesConnecting Ethernet Media Ieee Standard Media Type Max. Distance Port Module FiberConnecting Fiber Optic SC-type, Snap-In Connecting Fiber Optic ST-type, twist-lockConnecting Single-Mode Fiber Optic 100BASE-TX Media Ieee StandardWww . GarrettCom . com DIN-Rail Mounting Quantity Description Din-Rail kit Installation proceduresWww . GarrettCom . com Mounting Dimensions for 6K8 with metal brackets Powering the Magnum 6K8-Series Industrial Field Switch Www . GarrettCom . com Preparation for Installing and Removing 6KPMVs from 6K8’s 6K8-Series Port Module 6KPMV Installation1a Removing the Top panel from the Chassis base of the unit Remove Chassis Cover2a a Magnum 6K8 unit with main board motherboard only Installing 6KPM Cards in the Magnum 6K8-Series2b Granddaughter Board shown separately Female latch connector 2h sliding in the top cover onto the chassis base track Retaining screws shown by arrows Remove 6KPM Card Removing 6KPM CardsRemoving a 6KPM Card Enlarged view of Magnum 6K8-Series Console Port area Connecting a Management Console Terminal to Magnum 6K8DB-9 Console port connector Switching Functionality1 RS-232 DB-9 Console Com port Serial port pin assignments Filtering and Forwarding Dual LEDs Status on TOP and Front of the 6K8-Series unitAddress Learning Auto-Cross Mdix and Auto-negotiation, for RJ-45 ports Flow-control, Ieee 802.3x Standard Www . GarrettCom . com ’cvr 6KP4V6KPMV Module Description Introduction Magnum 6K8 Industrial Field Switch Port ModulesMagnum 6K8-Series Managed Segments. When installed in aSwitch, the copper port Dual speed copper ports1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module Activity ACT, Link LK, Mode 100Mbps fiber opticMagnum 6KP6 Transceivers all in one module. This6KP6-RJSSC 4@ 2@100Mbps single Mode FX-SC-type, snap Connector10/100Mbps RJ-45 Ports Port@ 100Mbps Multi-Mode Fiber port 5 6KP8-MTRJ, 8 @100Mb multi-mode FX, Mtrj Small-Form-factorMagnum 6KP8-45MT Module is a combo module with Port multi-mode fiber LC connector 10/100Mb 8-Port 9 6KP8-RJ45 Twisted PairPoE LEDs Summary 45-2MT eight ports Module is a 100Mb SC GBIC-SXSC Gigabit fiber 1000Mb, multi-mode SC Connector12a GBIC-LXSC Gigabit fiber 1000Mb, multi-mode SC Connector Standard 1@ 1000Mb Fiber SC + 2@GBPM-2OTX Two Gigabit option Before Calling for Assistance When Calling for Assistance No Problem Found Appendix B Internal DC Power Supply Options B3.0 Applications for DC Powered Ethernet Switches B2.0 -48VDC, 24VDC and 125VDC POWER, Theory of OperationB4.0 6K8-SERIES, -48V, 24, 125 or 5VDC Installation B7.0 Troubleshooting C4.0 Features and Benefits of the DUAL-SOURCE Design C5.1 UL Requirements External Terminal Block on a Magnum 6K8 -48VDCExample Magnum 6K8 -24VDC C6.0 Ordering Information Optional
Related manuals
Manual 69 pages 29.41 Kb