GarrettCom 6K8 manual 5 6KP8-MTRJ, 8 @100Mb multi-mode FX, Mtrj Small-Form-factor

Page 59

Magnum 6K8-Series Industrial Field Switch Installation and User Guide (04/07)

FDX/HDX LED indicating full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed for the copper port, which is 100Mbps when the LED is ON and 10 MB, when the LED is OFF.

5.2.4a 6KP6-RJ10ST 4 @ 10/100 MB copper port and 2@10Mbps multi- mode FL-ST-type, “twist-lock” connector

The Magnum 6KP6-RJ10ST is also a Combo module equipped with 4 dual speed copper ports and 2 multi-mode 10 MB fiber ST-type connectors. It provides a combination of copper and Fiber functions in one module to the 6K8-Series Switches, supporting four Copper and two 10Mb of ST fiber network segments.

The 6KP6-RJ10ST, when installed in a Magnum 6K8-Series Switch has copper supporting the 100m distance and Fiber supporting multi-mode fiber cable allow to connect the legacy network of 10Mb requirement in the network. Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED indicating proper connectivity with the remote device when lit, and a FDX/HDX LED indicating full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed for the copper port, which is 10Mbps when the LED is ON and 10 MB when the LED is OFF.

5.2.56KP8-MTRJ, 8 @100Mb multi-mode FX, MTRJ Small-Form-factor

Magnum 6KP8-MTRJ is a multi-mode fiber optic 8-port module equipped with

a small-form-factor MTRJ-type

6KP8-MTRJ,

connector. It looks almost like

“small-form-factor”

8 Port@ 100Mbps Multi-Mode Fiber port

an RJ-45 port, but it is black in

color. The MT-RJ’s small size

1

and ease of connection make it

1

3

5

7

a good choice for 100Mbps

ACT

ACT

F/H

F/H

2

ACT

ACT

F/H

LK

LK

F/H

“fiber-to-the-desktop” Ethernet

LK

LK

ACT

ACT

connectivity. When installed in

F/H

F/H

ACT

ACT

F/H

LK 2

4 LK

6LK

8 LK

F/H

3

a Magnum 6K8-Series Switch,

1

ACTIVITY

2

FULL/HALF

it supports fiber optic cable

	distances up the IEEE-standard	3	LINK
	100Mbps distance limits, i.e.,	3

typically 2km at full duplex and 412m at half-duplex.

www . GarrettCom . com

54

Image 59

Contents Industrial Field Switch Trademarks Canadian Emission Contacting GarrettCom, IncIntroduction Table of ContentsInstallation 14 6KM-BLNK TroubleshootingOverview Magnum LineMaximum 10 Mbps Ethernet Segment Lengths Technical SpecificationsPerformance Network Standards and Compliance, hardwareManagement Console connector Fiber Multi-mode connector types supportedFiber Single-mode connector types Alarm Relay ContactsAgency Approvals Magnum 6K8 DC Power Supply OptionsPer-port MDI or Mdix on RJ-45 MountingsMagnum 6K8 Port Modules Configuration OptionsOrdering Information GBIC1000Mb Transceiver options for Mangum 6K8-Series Introduction Inspecting the Package and Product Product Description Magnum 6K8-Series 6K8 1a Magnum 6K8-Series, Industrial Field Switch Www . GarrettCom . com Eight-port SFF fiber modules 6K8-MTRJ, 6K8-MLC, 100Mb Fiber Normally are set factory default toOperate in full-duplex mode for best Fiber distance and performance. UsingNegotiation is not disabled FDX/HDX LED is on to When lit. The 10/100 LED Indicates operation at 100MbSpeed when on and at 10 MB Speed when OFF when autoST or SC @RJ-45 + 2@ 100MbFour-Port 10 MB and 100Mb mm Fiber ST Modules Gigabit 1000Mbps port modules 7a GBPM-2OTX Two Gigabit port option Packet Prioritization, 802.1p QOS Gbic DescriptionManaged Network Software MNS-6K for Magnum 6K8-Series Frame Buffering and Flow ControlWww . GarrettCom . com „ Large selection of built-in fiber options at 10/100/1000Mb Applications Interne Control Center Scada Mounting Instructions Copper Locating Magnum 6K8-Series SwitchesConnecting Ethernet Media Ieee Standard Media Type Max. Distance Port Module FiberConnecting Single-Mode Fiber Optic Connecting Fiber Optic ST-type, twist-lockConnecting Fiber Optic SC-type, Snap-In 100BASE-TX Media Ieee StandardWww . GarrettCom . com DIN-Rail Mounting Quantity Description Din-Rail kit Installation proceduresWww . GarrettCom . com Mounting Dimensions for 6K8 with metal brackets Powering the Magnum 6K8-Series Industrial Field Switch Www . GarrettCom . com Preparation for Installing and Removing 6KPMVs from 6K8’s 6K8-Series Port Module 6KPMV Installation1a Removing the Top panel from the Chassis base of the unit Remove Chassis Cover2b Granddaughter Board shown separately Installing 6KPM Cards in the Magnum 6K8-Series2a a Magnum 6K8 unit with main board motherboard only Female latch connector 2h sliding in the top cover onto the chassis base track Removing a 6KPM Card Removing 6KPM CardsRetaining screws shown by arrows Remove 6KPM Card Enlarged view of Magnum 6K8-Series Console Port area Connecting a Management Console Terminal to Magnum 6K81 RS-232 DB-9 Console Com port Serial port pin assignments Switching FunctionalityDB-9 Console port connector Address Learning Dual LEDs Status on TOP and Front of the 6K8-Series unitFiltering and Forwarding Auto-Cross Mdix and Auto-negotiation, for RJ-45 ports Flow-control, Ieee 802.3x Standard Www . GarrettCom . com ’cvr 6KP4V6KPMV Module Description Introduction Magnum 6K8 Industrial Field Switch Port ModulesMagnum 6K8-Series Managed Segments. When installed in aSwitch, the copper port Dual speed copper ports1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module Activity ACT, Link LK, Mode 100Mbps fiber opticMagnum 6KP6 Transceivers all in one module. This10/100Mbps RJ-45 Ports 2@100Mbps single Mode FX-SC-type, snap Connector6KP6-RJSSC 4@ Port@ 100Mbps Multi-Mode Fiber port 5 6KP8-MTRJ, 8 @100Mb multi-mode FX, Mtrj Small-Form-factorMagnum 6KP8-45MT Module is a combo module with Port multi-mode fiber LC connector 10/100Mb 8-Port 9 6KP8-RJ45 Twisted PairPoE LEDs Summary 45-2MT eight ports Module is a 100Mb SC GBIC-SXSC Gigabit fiber 1000Mb, multi-mode SC Connector12a GBIC-LXSC Gigabit fiber 1000Mb, multi-mode SC Connector Standard 1@ 1000Mb Fiber SC + 2@GBPM-2OTX Two Gigabit option Before Calling for Assistance When Calling for Assistance No Problem Found Appendix B Internal DC Power Supply Options B3.0 Applications for DC Powered Ethernet Switches B2.0 -48VDC, 24VDC and 125VDC POWER, Theory of OperationB4.0 6K8-SERIES, -48V, 24, 125 or 5VDC Installation B7.0 Troubleshooting C4.0 Features and Benefits of the DUAL-SOURCE Design C5.1 UL Requirements External Terminal Block on a Magnum 6K8 -48VDCExample Magnum 6K8 -24VDC C6.0 Ordering Information Optional

Related manuals

Manual 69 pages 29.41 Kb