0. Safety Precautions
Before carrying out installation, wiring, mainte- nance or inspection of the drive, read this in- struction manual thoroughly to gain a full under- standing of the correct operation procedures. Make sure that you have read all product details, safety information, warnings and cautions before use. The following classifications for warnings and cautions are used throughout this manual.
WARNING:
Denotes operating procedures and practices that may result in severe injury or loss of life if not correctly followed.
CAUTION:
Denotes operating procedures and practices that, if not strictly observed, may result in per- sonal injury or damage to the equipment.
WARNING:
FIRE AND PERSONAL INJURY HAZARD
This drive is designed for
The drive cannot be used by itself for elevators,
INSTALLATION
WARNING:
FIRE AND PERSONAL INJURY HAZARD
Install the drive to a
Do not place the drive near flammable materials, otherwise fires may result.
Do not hold the drive by its cover when trans- porting. Otherwise the drive could be damaged and cause injury to personnel.
Do not let any scraps of thread, paper, sawdust, dirt, metal shavings or other foreign objects get
inside the drive or onto the cooling fins, other- wise fire or problems with operation may result. AC input fuses are required to validate UL listing of this device.
Do not install and operate the drive if it is dam- aged or if some of the parts are missing. Doing so may result in severe personal injury.
Do not touch the drive cooling fin because the cooling fin reaches high temperatures during operation, otherwise personal injury may result.
Install the drive in the environment of pollution degree 2. If environment is pollution degree 3 or 4, the drive should be installed in a cabinet of IP54. Required for CE Certification.
WIRING
WARNING:
FIRE AND ELECTRIC SHOCK HAZARD.
When connecting the drive to a power supply, be sure to connect it via a circuit breaker, a leakage current breaker or a fuse, otherwise fires may result.
AC input fuses are required to validate the UL listing of the drive.
Use only fuses and circuit breakers with rated capacities that are suitable for use with the drive. Failure to do so may result in fire.
Connect the drive with a secure ground, other- wise electric shocks or fires may result.
Wiring work should only be carried out by suit- ably qualified personnel, otherwise electric shocks may result.
Make absolutely sure that the power supply is turned off (open) before wiring, otherwise electric shocks may result.
Wiring work should only be carried out after the drive has been installed, otherwise electric shocks or injury may result.
4