GE FVR-C9S-7UX instruction manual Classi Terminal Code Terminal Name Explanation of Function

FVR-C9S-7UX

Terminal Function Explanation cont.

Terminal Function Explanation

Classi-	Terminal Code	Terminal Name	Explanation of Function
fication
Output for			Outputs + 10VDC between FM and CM terminals. When
	FM	Analog Monitor	frquency setting is equal to the maximum frequency setting,
Motor			outputs + 10VDC at 150% current when monitoring output
			current.
			• Two DC voltmeters (internal resistance of 10K ohm or
			greater) can be connected.
			• In case of DC ammeter (1mA full scale), it is necessary to
			add series resistance of 10K ohm (1/2W)
			• This output is a pulse output constant frequency (38. 1 Hz)
			which has a variable duty.
Contact	30A, B, C	Combined Alarm Output	Output via no volt signal (contact1c) to indicate that the
Output		Terminals	drive's protective function has been activated by an alarm.
			• Contact capacity (DC48V. 0.3A)
			C92-04

18