12. Keypad Panel
Part Names and Functions
Digital monitor:
In program mode, the key- pad displays the various function codes and data values. During operation, it displays the output fre- quency, current, voltage, etc. If a fault occurs, the causes of the problem will be displayed as a code.
PROGRAM key (RESET key): Normal mode or program setting mode select key. If a fault occurs, this key is used to reset the fault.
8. 8. 8.
PRG
RESETRUN
FUNC | STOP | |
DATA | ||
|
FVR-C9S
RUN key: This key is used for starting operation. The LED (green) lights up during operation. This key does not function when terminal operation control F02_ _ 1 is selected.
STOP key: This key is used for stopping operation. This key does not function when terminal operation control F02 _ _1 is selected.
FUNCTION key (DATA key):
During normal mode, this key can be used to change the display unit (frequency display and output current display) while operation is either stopped or running. During the pro- gram setting mode, this key can be used to read and write the function codes and data.
UP/DOWN keys: These keys increase or decrease the frequency. When unit is in program setting mode, they change the function code or data values.
Controlling Method for Keypad Panel
1) Monitor change
During the normal mode, frequency display and output current display can be changed by pressing the FUNC/DATA key.
2) Run/Stop
F U N C
D ATA
6 | 0 . | 0 |
| 1. | 2 | A | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
F U N C
D ATA
When F02 is _ _ 0): Press RUN to run drive; press STOP to stop drive.
3) Frequency change
When F01 is _ _ 0: Press UP to increase frequency; press DOWN to decrease frequency.
Note) If FUNC/DATA is pressed while pressing UP or DOWN, frequency changing speed increases.
4) Function setting method
21