GE FVR-C9S-7UX instruction manual Motor Running Code

FVR-C9S-7UX

Function Code Tables

Function	Function		Date Code Range	Unit	Min.	Factory		Change
								During
Code					Set.	Setting
								Operation
F15	Motor Running	0	- 5 (code)	—	—	5		Yes
	Sound
F16	Fault Memory	The current and previous 3 fault events are displayed		—	—	—		No
		in order of occurrence
F17	Data Initialization	0: Inactive		—	—	0		No
		1: Reset to the initial value (value set at factory)
		0: Inactive
F18	Retry	1: Active (Retry times fixed at 5, Retry starts in		—	—	0		No
		.05s after trip)
F19	Motor	0	- 10	—	—	4		Yes
	Characteristics
F20	Jump Frequency	0	- 10Hz	Hz	1	3		Yes
	Range
F21	Jump Frequency 1	0	- 120Hz	Hz	1	0		Yes
F22	Jump Frequency 2	0	- 120 Hz	Hz	1	0		Yes
F23	Jump Frequency 3	0	- 120 Hz	Hz	1	0		Yes
F24	High Limiter	0	- 100%	%	1	100		Yes
F25	Low Limiter	0	- 100%	%	1	0		Yes
F26	Bias Setting	0	- 100%	%	1	0		Yes
F27	THR Terminal	0: External alarm input		—	—	0		No
	Function	1: Multistep speed selection (X1)
F28	BX Terminal	0: Motor coast-to-stop command input		—	—	0		No
	Function	1: Multistep speed selection (X2)
F29	Multistep Speed	0.0 - 120 Hz		Hz	1*	10.0	Hz	Yes
	Setting 1
F30	Multistep Speed	0.0 - 120 Hz		Hz	1*	20.0	Hz	Yes
	Setting 2
F31	Multistep Speed	0.0 - 120 Hz		Hz	1*	30.0	Hz	Yes
	Setting 3
F32	Meter Adjustment	0	- 99 (Full scale DC 6.5 - 10.5V)	—	1	85		Yes
F33	Meter Output	0: Output frequency monitor		—	1	0		Yes
	selection	1: Output current monitor

*1 Frequency can be set in increments of 0.1 Hz within a range of 0.0 to 99.9 Hz, and can be set in increments of 1 Hz C92-02

24