Enterasys Networks RBTSA-AB, RBTSA-AA manual Using the Enterasys Networks Installation CD

Page 29

Using the Enterasys Networks Installation CD

23

Using the Enterasys

Networks

Installation CD

The Enterasys Networks Installation CD contains the following tools and utilities:

■Enterasys Networks Wireless Infrastructure Device Manager—an administration tool that helps you select Enterasys Networks wireless LAN devices and launch their configurations in your Web browser.

To use the Enterasys Networks Installation CD, you need a computer running one of the operating systems and browser listed in Table 5.

Table 5 Supported Operating Systems and Browser

Operating Systems	Windows XP
	Windows 2000
	Windows NT 4.0
	Windows Me
	Windows 98
Browser	Internet Explorer (latest version is recommended)

To install one of the tools on your computer:

1Turn on the computer.

2Insert the Enterasys Networks Installation CD in the CD-ROM drive.

The setup menu appears. If it does not appear, you can start the setup menu from the Windows Start menu. For example: Start > Run > d:launch.exe.

3In the menu, click Tools and Utilities.

4In the next screen, click the tool you want to install.

5Follow the instructions on the screens to complete the installation. Reboot the computer if prompted to do so.

6Launch the tool from the Windows Start menu.

For details on using the Wireless Infrastructure Device Manager, see “Using the Enterasys Networks Wireless Infrastructure Device Manager” on page 26.

Image 29

Contents RoamAbout Page Contents Obtaining Support for Your Enterasys Networks Product END User License Agreement Regulatory Information Page About this Guide List conventions that are used throughout this guide ConventionsConventions Documentation Accessing OnlineRelated Product Registration Support About this Guide Introduction 802.11g 802.11aPlanning ConfigurationNetwork Wireless Infrastructure Network ConfigurationsExample Operating systems, and network printers, as shown in FigureEthernet Adapter UnpackingEthernet Adapter Deciding Where to Place the Ethernet Adapter Place the Ethernet Adapter onto the wall, as shown in Figure To wall-mount the Ethernet AdapterConnect the power ConnectingInstalling the Ethernet Adapter Connecting to a Hub As follows IndicatorsChecking the LED LED Descriptions Attaching An Need to ConfigureExternal Antenna Determining if youNetworks without a Dhcp Server Shows the Ethernet Adapter configuration factory defaults Ethernet Adapter Default SettingsUsing the Enterasys Networks Installation CD Installing the Ethernet Adapter Configuring the Ethernet Configuring the Ethernet Adapter Click Configure Button Description Configure the Ethernet Adapter through your Web browser UsingManagement SystemClearing Applying System Configuration Settings System Properties Setting Description Wireless Network Select Specify the Wireless LAN Service Area to allow External and one internal antenna- this setting Set the Data Preamble 40/64-bit Shared Key WEP No Security Open System104/128-bit Shared Key 128/152-bit Shared KeyTkip Radius Authentication Server Settings Enables or disables Snmp Using the Configuration Management System About Uart Configuring Operation ModeConfiguring Network Serial Port Settings Configuring Uart Settings0x34 0x31 0x33 0x39 Factory Defaults Applying SettingsUsing FTP default To restore the settings through softwareClick Restore Using Http Using TftpUnder Tools, click Backup Wireless Ethernet Adapter For details Summary Click Refresh to update the informationFollowing table ProblemsDiagnosing Troubleshooting SymptomSolutions Disconnecting the To disconnect the Ethernet AdapterSoftware UninstallingUpgrading Ethernet Adapter FirmwareGetting Help Enterasys Networks using one of the following methodsPage END User License Agreement Page Regulatory Information MANUFACTURER’S Declaration of Conformity Canada Industry Canada IC Europe EU Declaration of Conformity Bipt 108, 112, 116