Enterasys Networks RBTSA-AB, RBTSA-AA manual Using the Configuration Management System

Page 47

Using the Configuration Management System 41

CAUTION: With the Allow option of the System Default Mode selected, the Ethernet Adapter allows all Ethernet frames except those carrying the MAC addresses that are specified in the Access Control List and have the permission type Deny. Similarly, with the Deny option of the System Default Mode selected, the Ethernet Adapter denies all Ethernet frames except those carrying the MAC addresses that are specified in the Access Control List and have the permission type Allow.

Make sure that the MAC address of the computer through which you are configuring the Ethernet Adapter is not specified in the Access Control List with the permission type Deny if you want to set the access control type to Allow. If you want to set the Access Control Type to Deny, make sure that the MAC address of the computer is included in the Access Control List with the permission type Allow. Failure to do so results in access to the Ethernet Adapter being blocked; the Ethernet Adapter will no longer be configurable through the computer.

VORSICHT: Wenn im System Default Mode (Standardsystemmodus) die Option "Allow" (Zulassen) aktiviert ist, werden im Ethernet-Adapter alle Ethernet-Frames außer denen zugelassen, die in der Zugriffssteuerungsliste angegebene MAC-Adressen enthalten und den Berechtigungstyp "Deny" (Blockieren) besitzen. Wenn im System Default Mode (Standardsystemmodus) die Option "Deny" (Blockieren) aktiviert ist, werden im Ethernet-Adapter dementsprechend alle Ethernet-Frames außer denen gesperrt, die in der Zugriffssteuerungsliste angegebene MAC-Adressen enthalten und den Berechtigungstyp "Allow" (Zulassen) besitzen.

Die MAC-Adresse des Computers, über den der Ethernet-Adapter konfiguriert wird, darf daher in der Zugriffssteuerungsliste nicht den Berechtigungstyp "Deny" (Blockieren) besitzen, wenn Sie den Zugriffssteuerungstyp auf "Allow" (Zulassen) festlegen möchten. Soll der Zugriffssteuerungstyp auf Deny (Blockieren) festgelegt werden, muss die MAC-Adresse des Computers in der Zugriffssteuerungsliste enthalten sein und den Berechtigungstyp "Allow" (Zulassen) aufweisen. Andernfalls wird der Zugang zum Ethernet-Adapter blockiert, der dann nicht mehr über den Computer konfiguriert werden kann.

6Click Apply.

To delete one or more than one client(s) from the Access Control List, select the client(s) and then click Delete.

Image 47
Contents RoamAbout Page Contents Obtaining Support for Your Enterasys Networks Product END User License Agreement Regulatory Information Page About this Guide List conventions that are used throughout this guide ConventionsConventions Documentation Accessing OnlineRelated Product Registration Support About this Guide Introduction 802.11g 802.11aPlanning ConfigurationNetwork Operating systems, and network printers, as shown in Figure ConfigurationsWireless Infrastructure Network ExampleEthernet Adapter UnpackingEthernet Adapter Deciding Where to Place the Ethernet Adapter Place the Ethernet Adapter onto the wall, as shown in Figure To wall-mount the Ethernet AdapterConnect the power ConnectingInstalling the Ethernet Adapter Connecting to a Hub As follows IndicatorsChecking the LED LED Descriptions Determining if you Need to ConfigureAttaching An External AntennaNetworks without a Dhcp Server Shows the Ethernet Adapter configuration factory defaults Ethernet Adapter Default SettingsUsing the Enterasys Networks Installation CD Installing the Ethernet Adapter Configuring the Ethernet Configuring the Ethernet Adapter Click Configure Button Description System UsingConfigure the Ethernet Adapter through your Web browser ManagementClearing Applying System Configuration Settings System Properties Setting Description Wireless Network Select Specify the Wireless LAN Service Area to allow External and one internal antenna- this setting Set the Data Preamble 128/152-bit Shared Key No Security Open System40/64-bit Shared Key WEP 104/128-bit Shared KeyTkip Radius Authentication Server Settings Enables or disables Snmp Using the Configuration Management System About Uart Configuring Operation ModeConfiguring Network Serial Port Settings Configuring Uart Settings0x34 0x31 0x33 0x39 Factory Defaults Applying SettingsUsing FTP default To restore the settings through softwareClick Restore Using Http Using TftpUnder Tools, click Backup Wireless Ethernet Adapter For details Summary Click Refresh to update the informationFollowing table ProblemsDiagnosing Troubleshooting SymptomSolutions Disconnecting the To disconnect the Ethernet AdapterAdapter Firmware UninstallingSoftware Upgrading EthernetGetting Help Enterasys Networks using one of the following methodsPage END User License Agreement Page Regulatory Information MANUFACTURER’S Declaration of Conformity Canada Industry Canada IC Europe EU Declaration of Conformity Bipt 108, 112, 116