Enterasys Networks RBTSA-AA, RBTSA-AB manual Summary, Click Refresh to update the information

50CHAPTER 3: CONFIGURING THE ETHERNET ADAPTER

Viewing System Under System Summary, you can view the following information:

Summary

Table 14 System Summary Page

Property	Description	Default Value
Device Name	The name assigned to the Ethernet Adapter.	RoamAbout
	You can change the default name to one of	Ethernet
	your choice by clicking System Properties	Adapter -
	under System Configuration.	RBTSA
Device Location	If you use the default device name, entering	None
	the location is optional.
Country Code	The Country Code determines the available	Varies
	channels and transmission power level
	based on regulatory restrictions in the
	county where the Ethernet Adapter is
	installed.
Transmit Power	The level of transmission power (100%,	100%
	50%, 25%, 12%, or Min).
	You can change this setting by clicking
	Wireless Network under System Configuration.
MAC Address	The MAC address of the Ethernet Adapter.	N/A
Serial Number	The serial number of the Ethernet Adapter.	Varies
Firmware Version	The version of firmware the Ethernet	N/A
	Adapter is currently using.
DHCP Client	Determines if the Ethernet Adapter obtains	On
	its IP address from the DHCP server on the
	network.
IP Address	The IP address of the Ethernet Adapter. You	Varies
	can change this address by clicking IP
	Network under System Configuration.
Subnet Mask	The subnet mask address of the Ethernet	Varies
	Adapter. You can change this address by
	clicking IP Network under System
	Configuration.
Data Preamble	The data preamble setting (Short [Enhanced	Long
	performance] or Long [Wi-Fi Interoperable]).
	To change this setting, click Wireless
	Network under System Configuration.
System Up Time	The elapsed time since the Ethernet Adapter	Day 0, 0:00:00
	booted up.
Date Manufactured	The date the Ethernet Adapter was	N/A
	manufactured.

Click Refresh to update the information.