Mtu

Service Name	This is optional. Enter the Service name should your
	ISP requires it, otherwise leave it blank.
MTU	This is optional. You can specify the maximum size of
	your transmission packet to the Internet. Leave it as it
	is if you to not wish to set a maximum packet size.
Connection Type	If you select “Continuous”, the router will always
	connect to the ISP. If the WAN line breaks down and
	links again, the router will auto-reconnect to the ISP.
	If you select “Connect On Demand”, the router will
	auto-connect to the ISP when someone want to use the
	Internet and keep connected until the WAN idle timeout.
	The router will close the WAN connection if the time
	period that no one is using the Internet exceeds the
	“Idle Time”.
	If you select “Manual”, the router will connect to ISP
	only when you click “Connect” manually from the Web
	user interface. The WAN connection will not
	disconnected due to the idle timeout. If the WAN line
	breaks down and latter links again, the router will not
	auto-connect to the ISP.
Idle Time	You can specify an idle time threshold (minutes) for the
	WAN port. This means if no packets have been sent
	(no one using the Internet) during this specified period,
	the router will automatically disconnect the connection
	with your ISP.
	Note: This “idle timeout” function may not work due to
	abnormal activities of some network application
	software, computer virus or hacker attacks from the
	Internet. For example, some software sends network
	packets to the Internet in the background, even when
	you are not using the Internet. So please turn off your
	computer when you are not using it. This function also
	may not work with some ISP. So please make sure this
	function can work properly when you use this function
	in the first time, especially your ISP charge you by time
	used.

Click <OK> when you have finished the configuration above. Congratulations! You have completed the configuration for the PPPoE