Edimax Technology Wireless Broadband Router manual Internet Connection

Page 75

Parameters

Description

Information

You can see the router’s system information such as the

 

router’s: LAN MAC Address, WAN MAC Address,

 

Hardware version, Serial Number, Boot code Version,

 

Runtime code Version

3.2 Internet Connection

View the Broadband router’s current Internet connection status and other related information

Parameters

Description

Internet Connection

This page displays whether the WAN port is

 

connected to a Cable/DSL connection. It also

 

displays the router’s WAN port: WAN IP address,

 

Subnet Mask, and ISP Gateway as well as the

 

Primary DNS and Secondary DNS being used.

 

 

74

Image 75
Contents User’s Manual Page NAT Features Package ContentMinimum Requirements Wide Area Network WAN ResetGet to know the Broadband Router Back Panel Local Area Network LANLight Status Description Front PanelSetup Diagram Configure your PC to obtain an IP address automaticallyGetting started DNS Configuration Select Disable DNS 2b Windows XP 2c Windows IP Address Select Obtain an IP address from a Dhcp server 2d Windows NTPage General Setup Chapter Quick Setup Wizard ChapterTime Zone Quick SetupStatus Info. Chapter System Tools ChapterBroadband Type L2TP PptpCable Modem DNS Fixed-IP xDSLPPPoE MTU Pptp BEZEQ-ISRAEL L2TP Type in this MAC address in this section or use Telstra Big Pond Turn OFF the Router When YOU Finished Using the InternetGeneral Settings LAN WANSystem NATTime Zone Password Settings Remote Management WAN Page PPPoE PPP over Ethernet Wireless ISPDynamic IP Static IP Address8 DNS Ddns LAN IP LANFrom network loop happened Wireless Basic SettingsSetting Wlan MAC EssidAdvanced Settings Page Security IappWEP only 3.2 802.1x only WPA Pre-shared key 3.3 802.1x WEP Static keyWPA2AES WpatkipWPA Radius Access Control QoS Page Edit QoS Rule Will apply to. You can assign a single port number NAT Port Forwarding Page Virtual Server Page Special Applications Example Virtual ServerPage Example Example Special ApplicationsUPnP Settings ALG Settings Static Routing Firewall Access Control Rule for users by IP addresses Add PC Example Access Control Client PC ServiceURL Blocking Intrusion Detection Feature DoS Denial of Service4 DMZ Status Status and Information Primary DNS and Secondary DNS being used Internet ConnectionDevice Status System Log Security Log Active Dhcp Client Statistics Tool Restore to Factory Defaults tool to force Configuration ToolsFirmware Upgrade Perform a reset. Your settings will not be Appendix a How to Manually find your PC’s IP and MAC address Glossary Page UDP TCP FTP Smtp POP3TCP Snmp UCP