Edimax Technology Wireless Broadband Router manual Rule for users by IP addresses

Page 67

ParametersDescription

Deny

If select “Deny” then all PCs will be allowed to

 

access Internet accept for the PCs in the list

 

below.

Allow

If select “Allow” then all PCs will be denied to

 

access Internet accept for the PCs in the list

 

below.

Filter client PCs by IP

Fill “IP Filtering Table” to filter PC clients by IP.

Add PC

You can click Add PC to add an access control

 

rule for users by IP addresses.

Remove PC

If you want to remove some PC from the "IP

 

Filtering Table", select the PC you want to

 

remove in the table and then click "Delete

 

Selected". If you want remove all PCs from the

 

table, just click "Delete All" button.

Filter client PC by MAC address Check “Enable MAC Filtering” to enable MAC Filtering.

66

Image 67
Contents User’s Manual Page NAT Package Content FeaturesMinimum Requirements Wide Area Network WAN ResetGet to know the Broadband Router Back Panel Local Area Network LANLight Status Description Front PanelConfigure your PC to obtain an IP address automatically Setup DiagramGetting started DNS Configuration Select Disable DNS 2b Windows XP 2c Windows IP Address Select Obtain an IP address from a Dhcp server 2d Windows NTPage General Setup Chapter Quick Setup Wizard ChapterTime Zone Quick SetupStatus Info. Chapter System Tools ChapterBroadband Type L2TP PptpCable Modem DNS Fixed-IP xDSLPPPoE MTU Pptp BEZEQ-ISRAEL L2TP Type in this MAC address in this section or use Telstra Big Pond Turn OFF the Router When YOU Finished Using the InternetGeneral Settings LAN WANSystem NATTime Zone Password Settings Remote Management WAN Page PPPoE PPP over Ethernet Wireless ISPDynamic IP Static IP Address8 DNS Ddns LAN IP LANFrom network loop happened Basic Settings WirelessSetting Wlan MAC EssidAdvanced Settings Page Security IappWEP only 3.2 802.1x only WPA Pre-shared key 3.3 802.1x WEP Static keyWPA2AES WpatkipWPA Radius Access Control QoS Page Edit QoS Rule Will apply to. You can assign a single port number NAT Port Forwarding Page Virtual Server Page Special Applications Example Virtual ServerPage Example Example Special ApplicationsUPnP Settings ALG Settings Static Routing Firewall Access Control Rule for users by IP addresses Add PC Example Access Control Client PC ServiceURL Blocking Intrusion Detection Feature DoS Denial of Service4 DMZ Status Status and Information Primary DNS and Secondary DNS being used Internet ConnectionDevice Status System Log Security Log Active Dhcp Client Statistics Tool Restore to Factory Defaults tool to force Configuration ToolsFirmware Upgrade Perform a reset. Your settings will not be Appendix a How to Manually find your PC’s IP and MAC address Glossary Page UDP TCP FTP Smtp POP3TCP Snmp UCP