Edimax Technology Wireless Broadband Router manual QoS

Enable wireless access control	Enable wireless access control
Add MAC address into the list	Fill in the "MAC Address" and
	"Comment" of the wireless station to be
	added and then click "Add". Then this
	wireless station will be added into the
	"Current Access Control List" below. If
	you find any issues before adding it and
	want to retype again. Just click "Clear"
	and both "MAC Address" and
	"Comment" fields will be cleared.
Remove MAC address from list	If you want to remove some MAC
	address from the "Current Access
	Control List ", select the MAC
	addresses you want to remove in the
	list and then click "Delete Selected". If
	you want remove all MAC addresses
	from the table, just click "Delete All"
	button. Click "Reset" will clear your
	current selections.

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

2.5 QoS

The QoS can let you classify Internet application traffic by source/destination IP address and port number. You can assign priority for each type of application and reserve bandwidth for it. The packets of applications with higher priority will always go first. Lower priority applications will get bandwidth after higher priority applications get enough bandwidth. This can let you have a better experience in using critical real time services like Internet phone, video conference …etc. All the applications not specified by you are classified as rule name “Others”. The rule with smaller priority number has higher priority; the rule with larger priority number has lower priority. You can adjust the priority of the rules by moving them up or down.

49