Edimax Technology Wireless Broadband Router manual

Page 33

Parameters	Description
2.2.1 Dynamic IP address	Your ISP will automatically give you an IP
	address
2.2.2 Static IP address	Your ISP has given you an IP address
	already
2.2.3 PPPoE	Your ISP requires PPPoE connection.
2.2.4 PPTP	Your ISP requires you to use a Point-to-Point
	Tunneling Protocol (PPTP) connection.
2.2.5 L2TP	Your ISP requires L2TP connection.
2.2.6 Telstra Big Pond	Your ISP requires Telstra Big Pond
connection.
2.2.7 DNS	You can specify a DNS server that you wish
	to use
2.2.8 DDNS	You can specify a DDNS server that you wish
	to use and configure the user name and
	password provided by you DDNS service
	provider.
	32

Image 33

Contents User’s Manual Page NAT Features Package ContentMinimum Requirements Get to know the Broadband Router Back Panel ResetLocal Area Network LAN Wide Area Network WANLight Status Description Front PanelSetup Diagram Configure your PC to obtain an IP address automaticallyGetting started DNS Configuration Select Disable DNS 2b Windows XP 2c Windows IP Address Select Obtain an IP address from a Dhcp server 2d Windows NTPage General Setup Chapter Quick Setup Wizard ChapterStatus Info. Chapter Quick SetupSystem Tools Chapter Time ZoneBroadband Type L2TP PptpCable Modem DNS Fixed-IP xDSLPPPoE MTU Pptp BEZEQ-ISRAEL L2TP Type in this MAC address in this section or use Telstra Big Pond Turn OFF the Router When YOU Finished Using the InternetGeneral Settings LAN WANSystem NATTime Zone Password Settings Remote Management WAN Page Dynamic IP Wireless ISPStatic IP Address PPPoE PPP over Ethernet8 DNS Ddns LAN IP LANFrom network loop happened Wireless Basic SettingsSetting Wlan MAC EssidAdvanced Settings Page Security IappWEP only 3.2 802.1x only WPA Pre-shared key 3.3 802.1x WEP Static keyWPA2AES WpatkipWPA Radius Access Control QoS Page Edit QoS Rule Will apply to. You can assign a single port number NAT Port Forwarding Page Virtual Server Page Special Applications Example Virtual ServerPage Example Example Special ApplicationsUPnP Settings ALG Settings Static Routing Firewall Access Control Rule for users by IP addresses Add PC Example Access Control Client PC ServiceURL Blocking Intrusion Detection Feature DoS Denial of Service4 DMZ Status Status and Information Primary DNS and Secondary DNS being used Internet ConnectionDevice Status System Log Security Log Active Dhcp Client Statistics Tool Restore to Factory Defaults tool to force Configuration ToolsFirmware Upgrade Perform a reset. Your settings will not be Appendix a How to Manually find your PC’s IP and MAC address Glossary Page TCP TCP FTP Smtp POP3Snmp UCP UDP