provided by UPnP can let applications that support UPnP smoothly connect to Internet sites without any incompatibility problem due to the NAPT port translation.
Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)
2.6.5 ALG Settings
You can select applications that need “Application Layer Gateway” to support.
Parameters | Default | Description |
Enable |
| You can select to enable “Application Layer |
|
| Gateway”, then the router will let that |
|
| application correctly pass though the NAT |
|
| gateway. |
|
|
|
62