Note: If the total assigned bandwidth of higher priority applications is larger than the maximum bandwidth provided by the WAN port, the other applications will not get any bandwidth.
Parameters | Description |
Enable/Disable QoS | You can check “Enable QoS” to enable |
| QoS function for the WAN port. You also |
| can uncheck “Enable QoS” to disable QoS |
| function for the WAN port. |
Add a QoS rule into the table | Click “Add” then you will enter a form of the |
| QoS rule. Click “Apply” after filling out the |
| form and the rule will be added into the |
| table. |
Remove QoS rules from table If you want to remove some QoS rules from the table, select the QoS rules you want to remove in the table and then click "Delete Selected". If you want remove all QoS rules from the table, just click "Delete All" button. Click "Reset" will clear your current selections.
50