Edimax Technology Wireless Broadband Router manual Access Control

Page 66

Parameters

Description

2.6.1 Access Control

Access Control allows you to specify which

 

hosts users can or cannot have access to

 

certain Internet applications

2.6.2 URL Blocking

URL Blocking allow you to specify which URLs

 

can not be accessed by users.

2.6.3 DoS

The Broadband router's firewall can block

 

common hacker attacks and can log the attack

 

activities.

2.6.4 DMZ

The DMZ function allows you to re-direct all

 

packets going to your WAN port IP address to a

 

particular IP address in your LAN.

Click on one of the firewall selections and proceed to the manual’s relevant sub-section

2.7.1 Access Control

If you want to restrict users from accessing certain Internet applications/services (e.g. Internet websites, email, FTP etc.), then this is the place to set that configuration. Access Control allows users to define the traffic type permitted in your LAN. You can control which PC client can have access to these services.

65

Image 66
Contents User’s Manual Page NAT Features Package ContentMinimum Requirements Local Area Network LAN ResetGet to know the Broadband Router Back Panel Wide Area Network WANFront Panel Light Status DescriptionSetup Diagram Configure your PC to obtain an IP address automaticallyGetting started DNS Configuration Select Disable DNS 2b Windows XP 2c Windows 2d Windows NT IP Address Select Obtain an IP address from a Dhcp serverPage Quick Setup Wizard Chapter General Setup ChapterSystem Tools Chapter Quick SetupStatus Info. Chapter Time ZoneBroadband Type Pptp L2TPCable Modem Fixed-IP xDSL DNSPPPoE MTU Pptp BEZEQ-ISRAEL L2TP Type in this MAC address in this section or use Turn OFF the Router When YOU Finished Using the Internet Telstra Big PondGeneral Settings WAN LANNAT SystemTime Zone Password Settings Remote Management WAN Page Static IP Address Wireless ISPDynamic IP PPPoE PPP over Ethernet8 DNS Ddns LAN LAN IPFrom network loop happened Wireless Basic SettingsSetting Essid Wlan MACAdvanced Settings Page Iapp SecurityWEP only 3.2 802.1x only 3.3 802.1x WEP Static key WPA Pre-shared keyWpatkip WPA2AESWPA Radius Access Control QoS Page Edit QoS Rule Will apply to. You can assign a single port number NAT Port Forwarding Page Virtual Server Page Example Virtual Server Special ApplicationsPage Example Special Applications ExampleUPnP Settings ALG Settings Static Routing Firewall Access Control Rule for users by IP addresses Add PC Client PC Service Example Access ControlURL Blocking DoS Denial of Service Intrusion Detection Feature4 DMZ Status Status and Information Internet Connection Primary DNS and Secondary DNS being usedDevice Status System Log Security Log Active Dhcp Client Statistics Tool Configuration Tools Restore to Factory Defaults tool to forceFirmware Upgrade Perform a reset. Your settings will not be Appendix a How to Manually find your PC’s IP and MAC address Glossary Page Snmp UCP TCP FTP Smtp POP3TCP UDP