Cypress CY7C64215 manual AC Analog Output Buffer Specifications, MHz Power = Low Power = High

CY7C64215

AC Analog Output Buffer Specifications

The following tables list guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V and 0°C < TA < 70°C, or 3.0V to 3.6V and 0°C < TA < 70°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and are for design guidance only.

Table 23. 5V AC Analog Output Buffer Specifications

Parameter	Description	Min	Typ	Max	Unit	Notes
TROB	Rising Settling Time to 0.1%, 1V Step, 100 pF Load	–	–	2.5	μs
	Power = Low
	Power = High	–	–	2.5	μs
TSOB	Falling Settling Time to 0.1%, 1V Step, 100 pF Load	–	–	2.2	μs
	Power = Low
	Power = High	–	–	2.2	μs
SRROB	Rising Slew Rate (20% to 80%), 1V Step, 100 pF Load	0.65	–	–	V/μs
	Power = Low
	Power = High	0.65	–	–	V/μs
SRFOB	Falling Slew Rate (80% to 20%), 1V Step, 100 pF Load	0.65	–	–	V/μs
	Power = Low
	Power = High	0.65	–	–	V/μs
BWOBSS	Small Signal Bandwidth, 20mVpp, 3-dB BW, 100 pF Load	0.8	–	–	MHz
	Power = Low
	Power = High	0.8	–	–	MHz
BWOBLS	Large Signal Bandwidth, 1Vpp, 3-dB BW, 100 pF Load	300	–	–	kHz
	Power = Low
	Power = High	300	–	–	kHz
Table 24. 3.3V AC Analog Output Buffer Specifications
Parameter	Description	Min	Typ	Max	Unit	Notes
TROB	Rising Settling Time to 0.1%, 1V Step, 100 pF Load	–	–	3.8	μs
	Power = Low
	Power = High	–	–	3.8	μs
TSOB	Falling Settling Time to 0.1%, 1V Step, 100 pF Load	–	–	2.6	μs
	Power = Low
	Power = High	–	–	2.6	μs
SRROB	Rising Slew Rate (20% to 80%), 1V Step, 100 pF Load	0.5	–	–	V/μs
	Power = Low
	Power = High	0.5	–	–	V/μs
SRFOB	Falling Slew Rate (80% to 20%), 1V Step, 100 pF Load	0.5	–	–	V/μs
	Power = Low
	Power = High	0.5	–	–	V/μs
BWOBSS	Small Signal Bandwidth, 20mVpp, 3dB BW, 100 pF Load	0.7	–	–	MHz
	Power = Low
	Power = High	0.7	–	–	MHz
BWOBLS	Large Signal Bandwidth, 1Vpp, 3dB BW, 100 pF Load	200	–	–	kHz
	Power = Low
	Power = High	200	–	–	kHz

Document 38-08036 Rev. *C Page 24 of 30

[+] Feedback