Bay Technical Associates DS72 manual Unit Reset, Troubleshooting, Network Interface, Logged Users

DS72 Host Module

System Status:

Available local memory (512 byte buffers): 16

TCP sockets in use:0

System up time (dd:hh:mm:ss):1:04:43:19

Available malloc memory: 32740

Strike CR to continue.

Network Interface

Network Status:

Medium status: fault

Medium faults: 0

Xmit bufr errs: 0

Available net buffers: 37

Receive queue status: open

Rev bufr errs: 1623

Strike ENTER to continue

Logged Users

Active	Users:		Internal	Conn Status User Name
User Address
1 *	RS-232	Port		+	admin
Strike "T",		CR to terminate a		session, CR to continue :

Unit Reset

IMPORTANT: Unit reset terminates both internal and external modem connections.

NOTE: You must be connected to the DS71-MD4 module to reset the unit. Resetting the unit does not return user selections to their default settings.

Select “Reset Unit” followed by <cr>. The module resets the unit and displays:

Reset the unit (Y/N) ?:y

Allow approximately 10 seconds for the unit to reset. It should state something similar to:

Initializing System Please Wait ...........

Troubleshooting:

Functional Solutions:

1.No menu serial port:

a.DS power is on and cable connected to EIA232 serial port.

b.Verify the cable and adapter has the correct pin out, RJ08X007 and 9FRJ45PC-1.

c.Cisco Rollover cables have the same pin out as RJ08X007.

31