Sony GDM-17SE2T manual Adjusting the Convergence, Setting the Color Temperature

Adjusting the Convergence

The adjustment data becomes the common setting for all input signals received.

1 Press the CONV button.

The “CONVERGENCE” OSD (On Screen Display) appears.

CONVERGENCE

CONV

023

2 For vertical adjustment Press the ¨ ./ > buttons.

. . . . to move Red down and Blue up

>. . . to move Red up and Blue down

For horizontal adjustment

Press the > ? // buttons.

?. . . to move Red to the left and Blue to the right / . . . to move Red to the right and Blue to the left

To erase the “CONVERGENCE” OSD, press the CONV button again.

The “CONVERGENCE” OSD automatically disappears 10 seconds after you release the buttons.

To reset, press the RESET button while the OSD is on.

Setting the Color Temperature

The selected color temperature becomes the common setting for all input signals.

1 Press the OPTION button.

The OPTION OSD (On Screen Display) appears.

	COLOR TEMPERATURE
	INPUT:	HD1 5 BNC
	LOCK:	UNLOCK LOCK
OPTION	80.0KHz/ 75Hz
	SELECT	SET

2 Press the > / button.

The “COLOR TEMPERATURE” OSD appears.

COLOR TEMPERATURE

9300K

1	2	3
R		76
G		66
B		55
SELECT		SET

3 Adjust with the > ?// and ¨ ./> buttons. There are three color temperature modes on the OSD. The factory settings are 1 : 5000K, 2 : 6500K, and 3 : 9300K.

To select 5000K, 6500K or 9300K

Press the > ?// buttons.

To obtain the desired color temperature
1 Press the > ?// buttons to select the 1, 2 or 3
	EN
mode.

2Press the ¨ ./> buttons to select R, G or B.

COLOR TEMPERATURE

9300K

1 2 3

R 76

G 66

B 55

SELECT SET

3Press the > ?// buttons to adjust the color temperature.

The “5000K,” “6500K” or “9300K” disappears. The color temperatures are memorized in the each mode-1, 2 and 3 until you reset each.

To erase the “COLOR TEMPERATURE” OSD, press the OPTION button again.

The OSD automatically disappears 30 seconds after you release the buttons.

To reset, press the RESET button while the OSD is on.

9