Sony GDM-17SE2T manual Functions of Controls

Functions of Controls

See the given pages for further description.

Front

Rear

RESET OPTION CONV GEOM SIZE CENT

POWER SAVING

		1
		(HD15)	2 (BNC)
R	G	B	HD	VD

1RESET button (page 11)

Press to reset the adjustment data to the factory-preset levels.

2OPTION button (page 9-11)

Press to set the option items, such as control lock and color temperature.

3CONV (convergence) button (page 9)

Press to adjust the vertical and horizontal convergence.

4GEOM (geometry) button (page 8)

Press to adjust the rotation and pincushion.

5SIZE (picture size) button (page 8)

Press to adjust the vertical and horizontal picture size.

6CENT (center) button (page 7)

Press to adjust the vertical and horizontal picture position.

7¨ (brightness) –/+ (./>) buttons (page 7-11)

Press to adjust the brightness.

–/+ (./>) buttons also adjust the each item.

8> (contrast) –/+ (?//) buttons (page 7-11)

Press to adjust the contrast.

–/+ (?//) buttons also adjust the each item.

9POWER SAVING indicator (page 12)

Lights up when the monitor is in the Power Saving Modes.

0u power switch and indicator (page 12)

Press to turn the monitor on or off. The indicator lights up when the monitor is turned on.

!¡ AC IN connector

Plug in an AC power cord.

!™ Video input 1 connector (HD15)

The cable accepts RGB video signals (0.714 Vp-p, positive) and SYNC signals.

5	4		3	2	1
	10	9	8	7	6
15 14 13				12	11

Pin No.	Signal	Pin No.	Signal
1	Red	8	Blue Ground
2	Green	9	DDC + 5V*
	(Composite	10	Ground
	Sync on Green)
		11	—
3	Blue
		12	Bi-Directional
4	—
			Data (SDA)*
5	DDC Ground*	13	H. Sync
6	Red Ground	14	V. Sync
7	Green Ground	15	Data Clock(SCL)*

*Display Data Channel (DDC) Standard by VESA

!£ Video input 2 connectors (5 BNC)

The cable accepts RGB video signals (0.714 Vp-p, positive) and SYNC signals.

6