![](/images/new-backgrounds/1147475/14747545x1.webp)
| Job 6 |
Two Collated, Folded Sheets into an | 2 folded sheets |
Envelope | (collated) |
Model Required: Your OfficeRight™ DI200 must |
|
have the optional Sheet Feeder A2. |
|
Notes: This job uses the second sheet feeder | envelope |
| |
A2 in 2nd Page mode to feed |
|
sets. Load sheets into the feeder in their collated
sequence: page one, page two, page one, page two and so on.
Step | Action | Tips | For More Details… |
|
|
|
|
1 | Make sure paper size | Choose 11” or 14” | Page 30 |
| setting is correct |
|
|
2 | Load sheets into | Load face down | Page 10 |
| Sheet Feeder A2. | and bottom edge first |
|
| See note above for |
|
|
| loading sequence |
|
|
3 | Load envelopes | Load right way up | Page 11 |
| into Feeder B | and facing you |
|
4 | Press button to select | Make sure BOTH | Page 6, 7 |
| Feeder A2 and 2nd | green indicators are lit |
|
| Page |
|
|
5 | Press button to select | Make sure green | Page 6, 7 |
| Envelope Fdr B | indicator lights |
|
6 | Press button to choose | Make sure moistener | Page 6, 7 |
| Seal or No Seal | has |
|
7 | Press Trial Piece button | Trial piece will not | Page 6, 7 |
| and check trial piece |
| |
8 | Press Start button | Stop button will stop | Page 6, 7 |
| to run job | machine at end of cycle |
|
Problems? See Error Messages, page 33, and Troubleshooting, page 37
OfficeRight™ DI200 Operator’s Guide | 21 |