Pitney Bowes DI200 Clearing Material Jams, …from sheet feeders/manual feeder

Page 40

Reference

Inserts or business reply envelopes feed poorly from Insert Feeder

Changing the orientation of the insert stack may help. For pre-folded inserts it’s normally best to load with the closed edge feeding first. Business reply envelopes can normally be loaded right way up and facing you. However, if the flaps are pulled open when feeding, try loading with the flaps down and facing you.

Following installation of Sheet Feeder 2, the system doesn’t work

•Check that the OfficeRight™ DI200 is correctly located onto Sheet Feeder 2.

•Turn the machine off, wait a few seconds and then turn it back on.

•Check that no debris (dust, paper, etc.) has fallen into the Sheet Feeder 2 electrical connector.

Clearing Material Jams

First, remove all paper from the affected feeders as indicated on the display. Then, if neccessary, clear sheets

…from sheet feeders/manual feeder

If the display indicates a jam in the sheet feeder(s) or manual feeder areas, pull the feeder assembly from the machine as shown. Then carefully remove any stalled material from the machine.

…from area beneath cover D

 

If the display indicates a jam beneath

 

cover D, press the blue button marked D

 

to release the cover. Lift the cover using

 

the finger grips on each side of the

 

stacker. Then carefully remove any

 

stalled material from the machine.

 

When closing the cover, latch it closed

 

by pressing down on the finger grips or

 

the central part of the cover in front of

Button D

the envelope feeder. DO NOT press

down on the stacker.

 

 

Continues on next page...

38

OfficeRight™ DI200 Operator’s Guide

Page 39 Page 41
Image 40
Page 39 Page 41
Contents
Operating Guide Statement of FCC Compliance Canada Contents Safety Important Safety InformationIntroduction Machine ConfigurationsAbout Your Machine Machine Controls, Indicators and Features Insert Cover E Release Button Blue Button Marked EInsert Feeder Not on All Models Operating Guide SlotMoistener Tank Lifting Handles One Each SideSecond Sheet Feeder A2 Optional Standard Sheet Feeder A1Controls DisplayMenu/Enter Yes and no buttonsSelection Buttons and Indicator Lights About the Sleep ModeTrial Piece StartConnecting Power and Turning On LoadingFilling the Moistener Loading the Sheet Feeders Feeders A1 and A2 Important AlwaysLoading the Envelope Feeder Feeder B Loading the Insert Feeder Feeder C Running Running JobsModels with an Optional Second Sheet Feeder A2 Job One Folded Sheet into an EnvelopeOne Folded Sheet, No Envelope Fold Only Step Action Tips More Details…One Folded Sheet + One Insert Into an EnvelopeOne Folded Sheet + One Insert into an Envelope One Insert into an Envelope Step Action Tips For More Details…Two Folded Sheets into an Envelope Seal or No SealTwo Collated, Folded Sheets into an EnvelopeTwo Folded Sheets, No Envelope Fold Only Two Collated, Folded Sheets No Envelope Fold Only Two Folded Sheets and an Insert Two Folded Sheets and an Insert into an Envelope Two Collated, Folded Sheets and an Insert into an EnvelopeTwo Collated, Folded Sheets and an Insert into an Envelope Manual Feed Manual Feeder MReset Counter MenuChange Paper Size Move the Address in the WindowWhen turned off… When turned on…Sheet Double Detect On/Off Insert Double Detect On/Off Safe Seal On/OffReference Error Messages Reference Lift Cover D Insert Remove Sheet General Troubleshooting Poor foldingMachine stops for doubles that aren’t there Machine feeds doubles without stopping…from sheet feeders/manual feeder Clearing Material Jams…from area beneath cover D Getting Help …from area beneath cover EOnline Support Phone SupportOrdering Supplies Ordering Online USA OnlyOrdering by Phone Requesting a PB Supply Catalog USA OnlyMaterial Specifications Sheet Feeders A1 and/or A2Machine Specifications Index Index Index Index SV40189-OGREVB
Related manuals
Manual 12 pages 3.84 Kb
Top Page Image Contents