The Menu
Press the Menu/Enter button repeatedly until the screen displays: Move address in window?
Press yes (
) to enter the function. The screen displays: Shift...X (where X is the current setting)
Move address
In window?
Shift.. X
Down Up
Set the desired number using the yes (
) and no (
) buttons. When you reach the setting you want, press the Menu/Enter button to confirm it. This takes you to the next menu option.
Run another trial piece and check it. If the address is centered in the window, press Start to run your job. If the address is not centered, repeat the procedure until you get the result you want.
Pressing no (
) when you have the option to move the address in the window takes you to the next menu option.
Sheet Double Detect On/Off
This option lets you turn the sheet feeder(s) double document detection on or off.
When turned on…
The machine stops automatically when it senses a double feed (two sheets feed when only one should). If you’re running a job with individually addressed inserts, it’s best to turn double detection on.
When turned off…
The machine ignores any double feeds that may occur. You may want to turn double detection off if you’re running a mail job and it is of little concern if a mail recipient receives duplicate sheets.
Press the Menu/Enter button repeatedly until the display shows the sheet DD status: Sheet DD is On (Off). Change?
Sheet DD is On. Change?
Press yes (
) to change the sheet
double detect status. The display will confirm the change. Press no (
) to go to the next menu option without changing this setting.
OfficeRight™ DI200 Operator’s Guide | 31 |