4.5.2 Menu Items and Values
The table below details the Printer Setup Menu List items with a brief description of the item’s function, and the possible values. A “*” denotes the default setting.
1) MEDIA TYPE | 2) SENSOR TYPE | |
Sets printing for direct thermal (no | Selects the sensor type used to detect the | |
ribbon) or thermal transfer (ribbon) | media’s Top Of Form (TOF) mark. | |
media. | Possible Values: | |
Possible Values: | ||
* EDGE: gap / notch TOF marks | ||
* DIRECT THERMAL | ||
REFL (Reflective): black marks | ||
THERMAL TRANSFER | CONT (Continuous): no TOF marks | |
|
| |
3) PRESENT SENSOR | 4) CUTTER EQUIPPED | |
Enables/Disables the optional | Enables/Disables the optional Media | |
Present Sensor feature. | Cutter feature. | |
Possible Values: | Possible Values: | |
* AUTO | * AUTO | |
NO | NO | |
YES | YES | |
|
| |
5) SOP ADJUST | 6) PRESENT ADJUST | |
Sets the start of print (SOP) location, | Specifies an additional amount to feed | |
relative to the top of form. | the label after printing. | |
Possible Values: | Possible Values: | |
Range: 0 – 255; nominal = *128 | Range: 0 – 255; nominal = *128 | |
(0 = close to edge; 255 = farthest | (0 = close to edge; 255 = farthest from | |
from edge) | edge) | |
|
| |
7) BAUD RATE | 8) DATA BITS | |
Sets the serial port baud rate. (Must | Sets the serial data word length (Must | |
match the host setting). | match the host setting). | |
Possible Values: | Possible Values: | |
600 to 38.4k; default = *9600 BPS | * 8 | |
| 7 |
| 21 |