5.2Media Width Adjustment
When printing on less than full width media, the printer has a
1.With media loaded in the printer, print a label (press the
FEED + 
CANCEL buttons simultaneously) and examine it..
2.While observing the printed labels, loosen the Thumbscrew and move it to the left most position. (see Example 1, below).
3.Next, move the Thumbscrew to the right until the printed labels contain a complete, even image (see Example 2). Tighten the Thumbscrew.
☞When changing to a different width of label, readjust the Leveling Cam.
Example 1 – Over adjustment:
Too much adjustment produces an image that fades across the label. To correct this, move the Thumbscrew to the right.
Example 2 – Correct adjustment:
The proper adjustment produces a complete image with even print contrast across the label (see note below).
;Note:
| 39 |