4.7 Auto Loading Function
This printer is equipped with a function to automatically load paper.
When print paper is inserted into the insertion slot in accordance with “Setting Printing Paper” causes paper to be fed automatically by a specified amount.
If print paper is skewed or fed abnormally, remove it gently and insert the paper again. If you do not want to use this function, set this function disabled by using a memory switch. (Paper insertion is available with the FEED switch.)
If “Auto clear after paper setting” is set, the printer enters the data ready and print ready state after completing paper setting. Note that printing starts automatically if print data is present in the receiving buffer.
If “Clear with FEED switch after paper setting” is set, press the FEED switch once after completing auto loading.
If paper removal is attempted or paper is not inserted correctly during auto loading, paper feed operation stops. Insert the print paper again.
NOTE
•Do not pull the print paper during auto loading.
•If print paper is not fed by auto loading, remove the print paper and then insert it again.
•Note the direction of the print paper setting.
— 19 —