Citizen Systems CBM920II user manual Clearing Lamp Status, I/F signal status, error, etc, State

4.11 Clearing Lamp Status, I/F signal status, error, etc.

Lamp status and I/F signal status in various states of the printer are as shown below. Error state may vary a little depending on the printer mode.

Note that the some indication and output status may vary depending on the setting of memory switch.

State	Memory switch	Return	PAPER lamp	POWER lamp	I/F signal line
RAM error	— — —	Impossibility			BUSY, FAULT
Memory switch error	— — —	— — —		Lights	None
Mechanism error	MSW-E:0	FEED switch	Turning off	Lights	BUSY, FAULT
	MSW-E:1	FEED switch		Lights	BUSY, FAULT
PNE detection*2	MSW-9:0	PNE clear	Lights	Lights	BUSY, PE *1
	MSW-9:1	PNE clear	Turning off	Lights	PE *1
	MSW-9:2	PNE clear	Lights	Lights	None
PE detection	MSW-E:0	PE clear	Lights	Lights	BUSY, PE
	MSW-E:1	PE clear		Lights	BUSY, PE
Voltage error	— — —	Impossibility			BUSY, FAULT
In auto loading	— — —	— — —	Lights	Lights	BUSY, PE
PE clear	MSW-C:0	FEED switch	Lights	Lights	BUSY
Pressing FEED switch	MSW-A:0	— — —	Turning off	Lights	None
	MSW-A:1	— — —	Turning off	Lights	BUSY
At power ON	MSW-5:1	FEED switch	Slow blinking	Lights	BUSY
Hexadecimal dump setting	— — —	— — —	Lights	Lights	BUSY
Memory switch setting	— — —	— — —			BUSY
*Item selection	— — —	— — —	Lights	Lights	BUSY

*1: Subject to memory switch No.8 setting.

*2: PNE does not function when memory switch No. 4 is disabled.

— 26 —