Citizen Systems CBM920II user manual Print Control Function, List of Control Codes

8.PRINT CONTROL FUNCTION

8.1List of Control Codes

Symbol	Code	Function	Emulation		No.
	(Hexadecimal)		CBM920	iDP3110
LF	0A	Line feed after print	O*1	O*1	1
CR	0D	Carriage return and line feed	O*1	O*1	1
SI	0F	Normal size character	O	O	2
SO	0E	Double width character	O	O	2
RS	1E	Double width character	O	—	2
US	1F	Normal size character	O	—	2
CAN	18	Cancel data	O	—	3
DC2	12	Inverted character	O	—	4
DC1	11	Initialize	O	—	5
ESC + “B”	1B, 42	Feed paper continuously	O	O	6
ESC + “R”	1B, 52	Select international character	O	O	7
ESC + “t”	1B, 74	Select code page	O	O	8
ESC + “/”	1B, 2F	Register sentence	O	—	9
ESC + “! ”	1B, 21	Print registered characters	O	—	10
ESC + “%”	1B, 25	Enable/Disable registered characters	O*2	O*2	11
ESC + “&”	1B, 26	Register user-defined character	O*3	O*3	12
ESC + “K”	1B, 4B	Print bit image	O	O	13
FS + “W”	1C, 57, 1	Double height and width character / clear	O	—	14
ESC + “A”	1B, 41	Set line spacing	—	O	15
DC4	14	Clear double width character	—	O	2
DC3	13	Power down function	O*4	O*4	16
DC2	12	Power down function	—	O	16
ESC + “) ”	1B, 29,	Change memory switch	O	O	17

*1: Invalid in some case. Refer to the descriptions for “LF” and “CR”

*2: Invalid in some case. Refer to the descriptions for “Enable/Disable registered characters”.

*3: Function differs by the number of printable columns (specification). Refer to the descriptions for “Register user-defined character”.

*4: Different in function. Refer to the descriptions for “Power down function”.

— 36 —