Citizen Systems PPU-231II manual ESC ! n, Range

Page 19

ESC ! n

[Function]	Collectively specifying the printing mode
[Code]	<1B>H<21>H<n>
[Range]	0 n	255
[Outline]	Printing mode is assigned.

	Bit	Function	Value
	Bit	Function	0		1
			0		1
	0	Character Font	Font A		Font B
	1	Undefined
	2	Undefined
	3	Emphasis	Canceled		Specified
	4	Double height	Canceled		Specified
	5	Double width	Canceled		Specified
	6	Undefined
	7	Underline	Canceled		Specified
[Caution]	• With double height and double width being specified
	simultaneously, quadruple characters are created.

•An underline is attached to the full character width, which, however, is not attached to the part having been skipped by the horizontal tab. Neither is it attached to 90-right-turned characters.

•The underline width is as specified by the <ESC –> command. (The default setting is 1 dot width.)

•In case characters with different vertical magnification ratios coexist on the same line, they are printed on the same base line.

[Default]	n = 0
[See Also]	ESC E, ESC –, GS !

— 17 —

Image 19

Contents Command Reference Revision Print Control Functions Command Function Mode CodeESC \ Function Mode CodeCommand relative to NV memory Reference DefaultRange OutlineSee Also Command DetailsPrint Results See Also Sample Program Mode Standard ModePrint Result Can Range Outline DLE EOT nExample Page See Also DLE ENQ n ESC FF ESC SP n Default See AlsoLprint Aaaaa + CHR$&HA ESC ! n Lprint CHR$&HA END ESC $ n1 n2 100 Gosub Setchr ESC % nESC & s n m a p s⋅ a m-n+1 Font a ESC * m n1 n2 d k IMG1 ESC n ESC ESC 3 n ESC = n ESC ? n Function Code Outline Sample Program Print Results ESC @ESC D n k NUL ESC E n ESC G n ESC J n ESC L Definition value ESC M nDetails ESC R n ESC S ESC T n ESC V n Default Sample ProgramESC W xL xH yL yH dxL dxH dyL dyH CAN, ESC L, ESC T, GS P ESC \ nL nH ESC a n ESC c 3 n ESC c 4 n ESC c 5 n ESC d n ESC n n ’ ∝ ← n = Default Sample Program Print Results Horizontal Magnification GS ! nVertical Magnification Default See Also See Also ESC $, ESC T, ESC W, ESC \, GS P, GS \ GS $ nL nHGS * n1 n2 d n1⋅ n2⋅ Next I Next J Return Definition GS a pL pH n mGS / m Specifying starting/ending macro definition GS a m n GS B n GS H n Print Results GS I n GS L nL nH GS P, GS W GS P x y GS R 0 n GS R 1 n GS S 1DH56Hm 1DH56Hmn GS W nL nH GS L, GS P GS \ nL nH GS n1 n2 n3 GS a n Paper feed state triggered by Feed switch DLE EOT, GS r GS f n Selecting bar code height D1 ...... dn D1 ..... dk NULFor For Standard ModeDefault Initial value is not defined For page ModeUPC-A Description of Bar Codes For print examples, refer toAscii This bar code consists of 103 bar code characters FNC4 Special charactersDescription of Bar Codes See Also DLE EOT, GS a GS r nGS v 0 m xL xH yL yH d1...dk When xL+xH ⋅ 256= GS w n Range FS g3 m a1 a2 a3 a4 nL nH d1…dkReference FS g4 m a1 a2 a3 a4 nL nH FS g3 P n m Page Q n xL xH yL yH d1…dk 1… xL xH yL yH d1…dk n Page Related Commands FS p