Citizen Systems PPU-231II manual GS R 1 n, Default See Also

Page 72

GS R 1 n

[Function]	Setting receipt collection timer
[Code]	<1D>H<53>H<31>H<n>
[Range]	0 n 9
[Outline]	• This command is valid only when the collection function of
	the DIP switch is enabled.
	• This command sets the wait time till the receipts are collected
	automatically.
	• If n=1 to 9, n ⋅ 2.5 sec is set. If n=0, receipts are not collected
	automatically.
	• This command is ignored in any of the following cases.
	(1) There is no paper in the presenter.
	The state where no eject command is received or receipt
	has already been removed.
	(2) A command related to the next printing has been received.
	The state where a command related to the next printing
	has already been received.
[Caution]	This command is ignored when the collecting function of the
	DIP switch is disabled.
[Default]	n=0
[See Also]	GS R 0 n

— 70 —

Image 72

Contents Command Reference Revision Command Function Mode Code Print Control FunctionsFunction Mode Code ESC \Command relative to NV memory Default RangeOutline ReferenceCommand Details See AlsoPrint Results See Also Sample Program Standard Mode ModePrint Result Can DLE EOT n Range OutlineExample Page See Also DLE ENQ n ESC FF Default See Also ESC SP nLprint Aaaaa + CHR$&HA ESC ! n Lprint CHR$&HA END ESC $ n1 n2 100 ESC % n Gosub SetchrESC & s n m a p s⋅ a m-n+1 Font a ESC * m n1 n2 d k IMG1 ESC n ESC ESC 3 n ESC = n ESC ? n ESC @ Function Code Outline Sample Program Print ResultsESC D n k NUL ESC E n ESC G n ESC J n ESC L ESC M n Definition valueDetails ESC R n ESC S ESC T n Default Sample Program ESC V nESC W xL xH yL yH dxL dxH dyL dyH CAN, ESC L, ESC T, GS P ESC \ nL nH ESC a n ESC c 3 n ESC c 4 n ESC c 5 n ESC d n ESC n n ’ ∝ ← n = Default Sample Program Print Results GS ! n Horizontal MagnificationVertical Magnification Default See Also GS $ nL nH See Also ESC $, ESC T, ESC W, ESC \, GS P, GS \GS * n1 n2 d n1⋅ n2⋅ Next I Next J Return GS a pL pH n m DefinitionGS / m Specifying starting/ending macro definition GS a m n GS B n GS H n Print Results GS I n GS L nL nH GS P, GS W GS P x y GS R 0 n GS R 1 n GS S 1DH56Hm 1DH56Hmn GS W nL nH GS L, GS P GS \ nL nH GS n1 n2 n3 GS a n Paper feed state triggered by Feed switch DLE EOT, GS r GS f n Selecting bar code height D1 ..... dk NUL D1 ...... dnFor Standard Mode ForFor page Mode Default Initial value is not definedDescription of Bar Codes For print examples, refer to UPC-AAscii This bar code consists of 103 bar code characters Special characters FNC4Description of Bar Codes GS r n See Also DLE EOT, GS aGS v 0 m xL xH yL yH d1...dk When xL+xH ⋅ 256= GS w n FS g3 m a1 a2 a3 a4 nL nH d1…dk RangeReference FS g4 m a1 a2 a3 a4 nL nH FS g3 P n m Page Q n xL xH yL yH d1…dk 1… xL xH yL yH d1…dk n Page Related Commands FS p