Citizen Systems PPU-231II manual Esc L

Page 38

ESC L

[Function]	Selecting PAGE MODE
[Code]	<1B>H<4C>H
[Outline]	Switches from STANDARD MODE to PAGE MODE.
[Caution]	• This command is only effective if it entered at the beginning
	of a line.
	• This command is not effective if it is entered when in PAGE
	MODE.
	• STANDARD MODE is restored when printing specified by FF
	is finished or when ESC S is issued.
	• The character mapping start position will be the point specified
	by ESC T in the print area specified by ESC W.
	• The commands listed below, which have separate settings for
	PAGE MODE and STANDARD MODE, are changed to the
	settings for PAGE MODE use.
	(1)	Spacing setting:	ESC SP
	(2)	Line feed width setting: ESC 2, ESC 3
	• The following commands are valid only in PAGE MODE.
	(1)	ESC V Specifying/canceling 90°-right-turned characters.
	(2)	ESC a Aligning the characters.
	(3)	ESC { Specifying/canceling the inverted characters.
	(4)	GS L Setting the left margin.
	(5)	G3S W Setting the print area width.
	• ESC @ restores STANDARD MODE.
[See Also]	FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS \

— 36 —

Image 38

Contents Command Reference Revision Command Function Mode Code Print Control FunctionsFunction Mode Code ESC \Command relative to NV memory Outline DefaultRange ReferenceCommand Details See AlsoPrint Results See Also Sample Program Print Result Standard ModeMode Can Example DLE EOT nRange Outline Page See Also DLE ENQ n ESC FF Default See Also ESC SP nLprint Aaaaa + CHR$&HA ESC ! n Lprint CHR$&HA END ESC $ n1 n2 100 ESC % n Gosub SetchrESC & s n m a p s⋅ a m-n+1 Font a ESC * m n1 n2 d k IMG1 ESC n ESC ESC 3 n ESC = n ESC ? n ESC @ Function Code Outline Sample Program Print ResultsESC D n k NUL ESC E n ESC G n ESC J n ESC L Details ESC M nDefinition value ESC R n ESC S ESC T n Default Sample Program ESC V nESC W xL xH yL yH dxL dxH dyL dyH CAN, ESC L, ESC T, GS P ESC \ nL nH ESC a n ESC c 3 n ESC c 4 n ESC c 5 n ESC d n ESC n n ’ ∝ ← n = Default Sample Program Print Results Vertical Magnification GS ! nHorizontal Magnification Default See Also GS $ nL nH See Also ESC $, ESC T, ESC W, ESC \, GS P, GS \GS * n1 n2 d n1⋅ n2⋅ Next I Next J Return GS a pL pH n m DefinitionGS / m Specifying starting/ending macro definition GS a m n GS B n GS H n Print Results GS I n GS L nL nH GS P, GS W GS P x y GS R 0 n GS R 1 n GS S 1DH56Hm 1DH56Hmn GS W nL nH GS L, GS P GS \ nL nH GS n1 n2 n3 GS a n Paper feed state triggered by Feed switch DLE EOT, GS r GS f n Selecting bar code height D1 ..... dk NUL D1 ...... dnFor Standard Mode ForFor page Mode Default Initial value is not definedDescription of Bar Codes For print examples, refer to UPC-AAscii This bar code consists of 103 bar code characters Special characters FNC4Description of Bar Codes GS r n See Also DLE EOT, GS aGS v 0 m xL xH yL yH d1...dk When xL+xH ⋅ 256= GS w n FS g3 m a1 a2 a3 a4 nL nH d1…dk RangeReference FS g4 m a1 a2 a3 a4 nL nH FS g3 P n m Page Q n xL xH yL yH d1…dk 1… xL xH yL yH d1…dk n Page Related Commands FS p