Citizen Systems PPU-231II manual GS n1 n2 n3, See Also Sample Program

Page 78

GS ^ n1 n2 n3

[Function]	Executing the macro
[Code]	<1D>H<5E>H<n1><n2><n3>
[Range]	0	n1	255
	0	n2	255
	0	n3	1

[Outline]	Executing contents defined in macro.
	n1 : The number of times of macro execution
	n2 : Waiting time on macro execution
	Waiting time of n2 ⋅ 100 msec is given for every execution.
	n3 : Macro execution mode
	n3=0 Continuous execution:
	The Macro is executed “n1” times continuously at the
	time interval specified by “n2”.
	n3=1 Execution by FEED Switch:
	After waiting for the time specified by “n2”, the
	ARARM LED flickers and the FEED switch is waiting to
	be pressed. When it is pressed, the macro is executed
	once. This action is repeated “n1” times.
[Caution]	• When this command is received while in macro definition,
	suspension of macro definition is indicated. At this time, the
	defined content is cleared.
	• No execution takes place when the macro is held undefined
	or n1=0.
	• While in macro execution with n3=1, paper feed with the FEED
	switch is not available.
[Default]	The initial value is not defined.
[See Also]	GS :
[Sample Program]	Refer to Sample Program and Print Results for GS: on page 62.

— 76 —

Image 78

Contents Command Reference Revision Command Function Mode Code Print Control FunctionsFunction Mode Code ESC \Command relative to NV memory Outline DefaultRange ReferenceCommand Details See AlsoPrint Results See Also Sample Program Standard Mode ModePrint Result Can DLE EOT n Range OutlineExample Page See Also DLE ENQ n ESC FF Default See Also ESC SP nLprint Aaaaa + CHR$&HA ESC ! n Lprint CHR$&HA END ESC $ n1 n2 100 ESC % n Gosub SetchrESC & s n m a p s⋅ a m-n+1 Font a ESC * m n1 n2 d k IMG1 ESC n ESC ESC 3 n ESC = n ESC ? n ESC @ Function Code Outline Sample Program Print ResultsESC D n k NUL ESC E n ESC G n ESC J n ESC L ESC M n Definition valueDetails ESC R n ESC S ESC T n Default Sample Program ESC V nESC W xL xH yL yH dxL dxH dyL dyH CAN, ESC L, ESC T, GS P ESC \ nL nH ESC a n ESC c 3 n ESC c 4 n ESC c 5 n ESC d n ESC n n ’ ∝ ← n = Default Sample Program Print Results GS ! n Horizontal MagnificationVertical Magnification Default See Also GS $ nL nH See Also ESC $, ESC T, ESC W, ESC \, GS P, GS \GS * n1 n2 d n1⋅ n2⋅ Next I Next J Return GS a pL pH n m DefinitionGS / m Specifying starting/ending macro definition GS a m n GS B n GS H n Print Results GS I n GS L nL nH GS P, GS W GS P x y GS R 0 n GS R 1 n GS S 1DH56Hm 1DH56Hmn GS W nL nH GS L, GS P GS \ nL nH GS n1 n2 n3 GS a n Paper feed state triggered by Feed switch DLE EOT, GS r GS f n Selecting bar code height D1 ..... dk NUL D1 ...... dnFor Standard Mode ForFor page Mode Default Initial value is not definedDescription of Bar Codes For print examples, refer to UPC-AAscii This bar code consists of 103 bar code characters Special characters FNC4Description of Bar Codes GS r n See Also DLE EOT, GS aGS v 0 m xL xH yL yH d1...dk When xL+xH ⋅ 256= GS w n FS g3 m a1 a2 a3 a4 nL nH d1…dk RangeReference FS g4 m a1 a2 a3 a4 nL nH FS g3 P n m Page Q n xL xH yL yH d1…dk 1… xL xH yL yH d1…dk n Page Related Commands FS p